Bedienungsanleitung Marantz PM6002 (Seite 10 von 18) (Englisch)

522814

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH

NAMES AND FUNCTIONS OF PARTS

REMOTE CONTROLLER

Using this remote controller, you can control the

PM6002 and Marantz CD players, DVD players,

tuners, tape decks etc. that have a remote control

receptor. The operations possible by remote

controller may differ with each component; therefore

see the instruction manual that came with the

component.

The remote controller buttons are laid out as shown

below.

z POWER ON/STANDBY buttons

a. MAIN POWER ON button

Turns the PM6002 power on when it is in the

standby mode.

b. MAIN POWER STANDBY button

Sets the PM6002 power to the standby

mode when it is set to the power-on mode.

c. SOURCE POWER button

Switching the mode of a CD player, tuner,

CD-R or other Marantz component equipped

with a power standby function between

power-on and standby is enabled by pressing

this button after the FUNCTION SELECT

button corresponding to the component has

been pressed.

When this button is pressed after pressing

the TUNER button, the tuner’s power is

turned on; when it is pressed again, the

tuner is set to the standby mode.

When this button is pressed after pressing

the AMP button, the PM6002 is switched

from the power-on mode to the standby

mode or vice versa.

* The remote controller cannot be used to

turn the primary power of the amplifier ON

and OFF.

x Input selector buttons

• Input source Button

These buttons are for directly selecting the

input source. The AMP button is not used on

the PM6002.

Caution

In the PM6002, AUX and DVD, and

RECORDER 2’s TAPE and MD each share

the same input jacks. The signal codes for

controlling these Marantz products using the

RC002PM differ, therefore separate buttons

have been built into the remote controller.

• INPUT % Button

This button is for forward-feeding the input

source indications to select a desired

source.

The input source indication, which is

displayed on the function indicator on the

main frame, is fed to the right.

• INPUT ﬁ Button

This button is for backward-feeding the

input source indications to select a desired

source.

The input source indication, which is

displayed on the function indicator on the

main frame, is fed to the left.

OPEN/

SOURCE

POWER

PHONO CD

RECODER 2RECODER1

AMP

TUNER AUX

MUTE

REPEAT

ENTER

TOP MENU

MODE

SCAN PROG.

CANCEL

RANDOM

INPUT VOLUME

DVD

CD-R TAPE MD

c VOLUME adjustment buttons

• MUTE Button

This button activates the mute function.

Pressing this button again releases the

MUTE function.

The MUTE function can also be released

by pressing either the VOLUME 5 or ∞

buttons.

• VOLUME 5 Button

This button increases the volume level.

• VOLUME ∞ Button

This button decreases the volume level.

v Component operating buttons

These buttons are for performing basic

operations of a Marantz CD player, DVD player,

etc. The function of each button changes to

match the component selected as the input

source using the input selector buttons.

PM6002N_01_ENG.indd 6PM6002N_01_ENG.indd 6 07.7.18 9:56:13 AM07.7.18 9:56:13 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM6002 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info