Bedienungsanleitung Marantz SR-18EX (Seite 36 von 47) (Englisch)

6546

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

ENGLISH

OTHER FUNCTIONS

The Marantz RC-18SR includes the ability to tailor the lighting

features according to your preferences. As supplied from the

factory, the RC-18SR has lighting features (and lighting timings):

The lighting time is set at the factory for a period of 2 seconds

which you can change if you prefer a different lighting time. If you

wish to maximize battery life, you can de-active the lighting

function entirely.

There is also a lighting button ¤0, so that in any light situation, you

can activate the backlighting feature. The lighting time in this case

is set at the factory for a period of 2 seconds, which you can also

change. If you wish to conserve battery power, you can de-

activate the lighting function entirely.

RC-5 Shipped destination:

As mentioned earlier in this guide, the RC-18SR is provided with

many commands from the factory with infrared codes conforming to

the Philips RC-5 remote control language (used by Marantz, Philips,

and some other companies). We have provided two different RC-5

command code sets in the RC-18SR, due to the local requirements of

different markets and the different types of remote control codes

used in those markets. One code set is for North American (USA)

users, while the other code set is for REST users. Your RC-18SR has

been set at the factory for USA (United States) codes. It can be easily

changed, if you wish.

Set-Up:

To change the lighting time(s), or the destination setting, please

follow these steps:

n Select the SETUP mode, by holding the MEMO button ⁄3 and at

the same time pressing the OK button within the cursor keys ⁄6.

(see Figures 26 and 27)

Figure 26 Figure 27

LAMP - Lighting function ON or OFF and TIME

Press the D-5 direct function button, and you can then set the

time (in seconds) directly using the numeric key pad ⁄2 buttons.

A time figure consisting of only 1 digit can be input by pressing

the figure then waiting for 2 seconds or input “0” before entering a

desired digit. You can set time in the range from 0 up to 60

seconds (More time would use up more battery life than fewer

seconds). “2” is set when shipped from the factory. To set “OFF”

input “0”.

BEEP sound

The beep sounds when any buttons are pressed except the AMP

button.

The beep sound level can be set by pressing the D-6 button. The

display indicates “+” indication and the beeps are sounded by

pressing the D-6 button. The “+” indication is followed, by

another the “+” indication as the beep sound is increased; + →

++ → +++ → ++++

When the “++++” appears, this is the maximum. If the D-6 button

is pressed once more, it will reset to OFF.

“ ” is indicated in the LCD window when the beep sound is set.

Note:

The beep sound is different between the function buttons and

other buttons.

VER

Press the D-7 direct function button to switch between USA and

REST.

If you need to change this function, we recommend that you

make the change before you begin “learning” any new infrared

codes for other brands of equipment in your system.

Note:

The name of the DIRECT buttons will be erased if the USA/REST

version is pressed.

Battery life:

n Battery life will vary from user to user, if the remote is used

constantly or only occasionally, including the amount of

backlighting usage. We feel that you can expect the

batteries to last about 4 months, based upon 15 remote

control operations per day (every day), and 3 lighting

operations per day (every day). If the remote is used more

often, and if the lighting times are set to longer times than

the factory settings, then the battery life may be shortened

somewhat.

n As explained earlier in the guide, the RC-18SR’s

sophisticated battery conservation system will advise you

long before the battery power is fully exhausted, and will

further warn you to replace the batteries by simply

becoming inoperative at a certain point. The customized

memory contents and user-adjusted settings will still be

retained in memory. When you install a fresh set of

batteries, the memory contents are protected always,

because the RC-18SR uses the non-volatile memory.

Alkaline (and the newer lithium) types are recommended for

longest battery life.

As you become more familiar over time with how you are

using the RC-18SR in your A/V system, you may wish to

consider reducing the lighting time(s) if possible, as this

can help to extend the battery life.

Adjustment of the LCD contrast

n The LCD contrast can be adjusted as follows;

Enter SETUP mode of the RC-18SR by pressing the MEMO

and OK button. Press the VOL+ to increase the LCD

contrast. Press the VOL - to decrease the LCD contrast.

Press the OK buttons to end this setting and return the

original operation.

LOW

LEARN

NAME

2 3 4

LOW

LEARN

NAME

2 3 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-18EX Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info