Bedienungsanleitung Marantz SR-5000 (Seite 8 von 15) (Englisch)

570943

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

STADIUM

3 STEREO

THEATER HALL

CHURCH

PRO-LOGIC

c.When Pro-Logic mode:

Center speaker LARGE ⇔ SMALL ⇔ NONE

When the selection is finished, SET button is pushed. Then displayed

change to sub woofer ON or OFF

Sub woofer: ON ⇔ OFF

When the selection is finished, SET button is pushed. The display

returns to the origin.

d.When 3-Stereo mode:

Center speaker LARGE ⇔ SMALL

When the selection is finished, SET button is pushed. Then displayed

change to sub woofer ON or OFF

Sub woofer: ON ⇔ OFF

When the selection is finished, SET button is pushed. The display

returns to the origin.

e.Other surround, stereo mode

Sub woofer: ON ⇔ OFF

When the selection is finished, SET button is pushed. The display

returns to the origin. Mode of center/surround and sub woofer mode

is memorized.

!7 MASTER VOLUME CONTROL

Adjust the overall sound volume from the front, center, (sub woofer)

and rear speakers with this control.

Pre-Out (front, rear, center, sub woofer) can also be controlled.

!8 RDS Functions

a. SEARCH button

This key is used to search a station broadcasting, TP or PTY data by

scanning.

Press the DISPLAY Button then press the SEARCH button.

Now “RDS” is displayed, each further press of the SEARCH button

changes the display as shown below.

TP / PTY / FREQUENCY

When the desired item is displayed, press the TUNING UP or DOWN

button to start scanning.

b. DISPLAY button

Each press of this button changes the display contents as shown

below.

FREQUENCY / STATION NAME / PROGRAM NAME /

TIME(CLOCK) / TEXT / FREQUENCY

However, the above is not displayed when there is no RDS data with

the station being received.

c. PTY (PROGRAM TYPE)SELECT button

When “PTY” is selected with the SEARCH button, select the desired

program type by pressing the PTY SELECT button.

When the desired program type is displayed, press the TUNING UP or

DOWN button to start scanning.

!9 SURROUND MODE knob

Surround mode changes as follows whenever you adjust this knob.

For the digital equipment: CD, LD, DVD. (when selected optical or

coaxial input)

For the digital equipment: CD, LD, DVD. (when selected analog input)

For the analog equipment: TUNER(AM/FM), TAPE-1, TAPE-2, VCR

@0 STEREO(SURROUND OFF) button

When switching from surround mode to stereo mode, this button is

pushed.

When Dolby digital mode, This Button operates as down mix (2

channel) function and FTD’s “STEREO”indicator is light up.

@1 DIGITAL SELECT. button

Push this button to switch the digital signal (When CD, LD, DVD.

selected)

When CD function

a. DTS mode

Optical / Coaxial-1 / Coaxial-2

b. Stereo, Pro logic, 3 Stereo, Other surround (Hall etc.) mode

Optical / Coaxial-1 / Coaxial-2 / Analog(Digital off)

When DVD. function

a. DTS, Dolby Digital mode

Optical / Coaxial-1 / Coaxial-2

b. Stereo, Pro logic, 3 Stereo, Other surround (Hall etc.) mode

Optical / Coaxial-1 / Coaxial-2 / OFF (analog)

When LD/TV function

a. Dolby Digital, mode

Optical / Coaxial-1 / Coaxial-2

b. DTS mode

Optical / Coaxial-1 / Coaxial-2

c. Stereo mode

Optical / CoaxiaI-1 / Coaxial-2 / Analog

d. Dolby Pro logic, 3 Stereo, Other surround

Optical / CoaxiaI-1 / CoaxiaI-2 / Analog

STADIUM

3 STEREO

THEATER HALL

CHURCH

PRO-LOGIC

DTS

3 STEREO

THEATER

CHURCH

STADIUM

Dolby Digital

PRO-LOGIC

HALL

Front panel features

(See page 108 )

q POWER switch

When this switch is pressed once, the power turns ON and display

appear on the display panel. When pressed again, the power turns OFF.

After initialization or resetting, press this switch to enter the

standby mode. To turn the power ON, press any of the function

buttons of the main unit or the POWER button of the remote control

unit.

w SPEAKERS (ON-OFF) button

Use this button to select speaker system ON or OFF

e PHONES socket for stereo headphones

This jack is compatible with a wide range of conventional dynamic

headphone types.

NOTE:

Change the surround mode to STEREO when using the headphones.

r Tuning/Preset UP/DOWN, F/P(frequency/preset) buttons

During AM or FM reception, you can scan to other frequencies or preset

number by pressing these buttons.

t FM MODE button

Press this button to select stereo or monaural mode, when listening to

FM broadcasts.

y MEMORY button

Press this button to memorize the desired station frequency. Please

see Page 9 for a detailed usage.

u BASS CONTROL knob

Adjust the low frequency level with this control according to your taste

and room acoustics.

i TREBLE CONTROL knob

Adjust the high frequency level with this control according to your taste

and room acoustics.

o BALANCE CONTROL knob

Adjust the sound volume between left and right front speakers with

this control knob.

!0 VCR2 audio/video input jacks

Connect the audio/video output of the second VCR, etc. to these IN

jacks.

!1 Input selector button

This button selects the audio or audio/video source. The selected

source name will be displayed on FTD. Pushing this button in the

standby mode, allows to turn the power ON.

!2 SET button

When speaker mode is decided, this button is pushed.

!3 Mid night button (for Dolby digital, Digital Down mix mode only)

The source with large dynamic range is compressed.

!4 6-CH INPUT button

When selecting to other surround processor and/or equipment (example

MPEG2), this button is pushed. SR5OOO enters the state which can be

controlled to the input of 6 channels even if any state. All the displays

concerning surround mode are off. SR5OOO returns to former state

when 6 channel direct is made off.

!5 REMOTE SENSOR

This SENSOR receives the signals from the remote control unit.

!6 SPEAKER MODE button

Adjusting the settings of the center ,surround and sub woofer speaker

mode as follows. The setting of the main speakers can be switched

between LARGE ⇔ SMALL except in case “e” below.

Press the speaker mode button:

a.When DTS mode:

Center speaker LARGE ⇔ SMALL ⇔ NONE

When the selection is finished, SET button is pushed, then display

changes to surround speaker mode

Surround speaker LARGE ⇔ SMALL ⇔ NONE

When the selection is finished, SET button is pushed.Then displayed

changes to sub woofer ON or OFF

Sub woofer: ON ⇔ OFF

When the selection is finished, SET button is pushed. The display

returns to the origin.

b.When Dolby Digital mode:

Center speaker LARGE ⇔ SMALL ⇔ NONE

When the selection is finished, SET button is pushed. Then displayed

change to surround speaker mode

Surround speaker LARGE ⇔ SMALL ⇔ NONE

When the selection is finished, SET button is pushed.Then displayed

change to sub woofer ON or OFF

Sub woofer: ON ⇔ OFF

When the selection is finished, SET button is pushed. The display

returns to the origin.

Marantz SR-5000 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info