Bedienungsanleitung Marantz SR-5000 (Seite 10 von 15) (Englisch)

570943

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

PLAYBACK OPERATION

Normal playback

1. Press the POWER switch q to turn on the power.

2. Press the desired input selector !1 according to the table shown below.

3. Start playing the desired source.

Adjust the volume using the VOLUME control !7.

If necessary, adjust the tone using the BASS and TREBLE controls u

and i.

Source component Input selector

Compact Disc Player CD

FM or AM broadcasting FM / AM

Laser Disc Player or TV LD / TV

Video Cassette Recorder VCR1

Video Cassette Recorder VCR2

Digital Video Disc Player DVD

Cassette deck - 1 TAPE 1

Cassette deck - 2 TAPE 2

ADJUSTMENTS

Adjusting the surround level

To adjust the surround level, locate yourself in your usual listening position

and operate the remote control unit ⁄2. (Please see next page.)

Use this procedure to adjust the volume of each of the front, center, and

rear speakers when watching a movie or other video source in DOLBY

surround mode.

1. Press the DOLBY PRO LOGIC button.

2. Press the SPEAKER MODE !6 button to the select the center mode

corresponding to your speaker system configuration.

In this example, the center mode is set to NORMAL.

3. Press the TEST TONE button. A test signal tone is heard from the left,

center, right, and surround speakers in sequence.

The balance of the surround channel (rear) can be controlled using the

surround up/down keys when Surr-R or L is shown on the display

4. Using the remote control, adjust the volume of the test tone for center

and surround until the volume appears to be set at the same level for

all speakers.

5. When volume adjustment is completed, press the TEST TONE

button again so that the test signal tone stops.

Listening to a different audio source while

watching a video source

1. Select one of the following video sources !0.

VCR1, VCR2, DVD, LD.

2. Next, select one of the following audio sources !0.

CD, FM or AM, TAPE 1, TAPE 2,

Adjust the volume using the VOLUME control !7.

If necessary, adjust the tone using the BASS and TREBLE controls 7

and 8.

■ RECORDING WITH A CASSETTE DECK

■ Recording with TAPE 1, TAPE 2

1. Select the program source to be recorded with the INPUT FUNCTION

SELECTOR buttons !1.

2. Start recording on the cassette deck connected to the TAPE 1, 2 jacks.

3. Play back the desired program source.

• The volume, balance, bass and treble settings have no effect on the

recording or dubbing.

BASIC OPERATION

Listening to the tuner

1. Press the POWER switch q to turn on the power.

2. Press the AM or FM button t to select the desired band.

3. Press the TUNING UP and DOWN buttons r to tune in the

desired station. Pressing once for less than a half second changes

the frequency by one step. Pressing longer sequentially scans

frequencies in the indicated direction. Releasing the button in this

state activates the auto tuning function, which automatically scans

the frequencies until it reaches a station, at which point the TUNED

and auto tuning stops.

4. Adjust the sound volume with the VOLUME control !7.

If necessary, adjust the tone controls (BASS/TREBLE) u and i.

PRESETTING STATIONS

Up to 30 stations can be preset at random, regardless of the reception

band.

Tune in the station to be memorized using the auto or manual tuning.

Manual preset

1. Press the MEMO(memory) button y, then the “MEMO” indicator

lights up for about 5 seconds.

• When the MEMO indicator goes off, press again to memorize.

2. Select the preset number with TUNING UP/DOWN button r.

3. Press the MEMO(memory) button y again.

4. Repeat steps 1 to 3 to memorize other stations.

• When memorizing a new station, the prevision memorized station

the same preset number is cleared.

Auto preset

1. The receiver is set in FM.

2. You keeps pushing MEMO(memory) button 6 at about 3 seconds.

3. Then, tuner automatically begins scanning.

Scanning stops automatically after radio stations have been stored in

the Auto Preset memory.

■ PRESET TUNING

• To listen to a radio station stored in the station memory.

■ LISTENING TO FM STEREO BROADCASTS

• During FM braodcasts, press the FM MODE button t to select the

STEREO/MONO mode.

• Each time this button is pressed, the mode changes as follows.

Stereo mode: STEREO indicator lights up.

Mono mode: STEREO indicator goes off.

• When listening to very weak FM stereo stations, you may experience

higher than normal background hiss. Switch to monaural sound to

eliminate the hiss.

■ CHANGE OF 9K/10K SCAN STEP (Eurpe, Overseas only)

When you keeps pushing FM/AM button at about 3 seconds at AM

mode, scan step of 9K/10K Hz is switched.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info