Bedienungsanleitung Marantz SR-5400 (Seite 24 von 36) (Englisch)

6574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

SURROUND MODE

The SR5400 is equipped with many surround

modes. These are provided to reproduce a variety

of surround sound effects, according to the content

of the source to be played.

The available surround modes may be restricted

depending on the input signal and speaker setup.

AUTO

When this mode is selected, the receiver

determines whether the digital input signal is Dolby

Digital, Dolby Digital Surround EX, DTS, DTS-ES,

DTS 96/24 or PCM-audio.

Surround EX & DTS-ES will operate for

multichannel source that has a Dolby Digital

Surround EX or DTS-ES auto trigger flag in the

digital signal.

When a Dolby Digital or DTS signal is input, the

number of channels for which the corresponding

signal is encoded will be played.

Inputting a Dolby Digital two channel signal with

Dolby surround status automatically subjects that

signal to Pro Logic II movie processing before play.

PCM 96 kHz source material can be played in this

mode.

Notes:

• When you use this mode with certain DVD and

CD players, performing operations such as “Skip”

or “Stop” may momentarily interrupt the output.

• When the signal is not decoded, the mode is

changed to AUTO mode automatically. Refer to

page 23 to confirm the available decoding mode.

MODE

(Dolby Digital, Pro Logic

MOVIE, Pro Logic

MUSIC, Pro Logic)

This mode is used with source materials encoded

in Dolby Digital and Dolby Surround.

DOLBY DIGITAL

This mode is enabled when playing source

materials encoded in Dolby Digital.

Playing multi-channel encoded 5.1-channel Dolby

Digital sources provides five main audio channels

(left, center, right, surround left and surround right)

and Low Frequency Effect channel.

Dolby Digital EX decoding is not available in this

mode.

Dolby Pro Logic

brings the excitement of surround

sound to any stereo mix, while making existing

Dolby Surround mixes sound more like discrete 5.1

channels Surround sound.

Dolby Pro Logic II has 3 modes. Please see below.

Pro Logic

MOVIE

This mode provides 5.1 channel surround sound

from Dolby Surround encoded stereo movie sound

tracks.

Pro Logic

MUSIC

This mode provides 5.1 channel surround sound

from conventional stereo sources, analog or digital,

such as CD, Tape, FM, TV, Stereo VCR, etc.

Pro Logic

This mode emulated original Dolby Pro Logic

decoding (3/1 surround) suit for Dolby Surround

encoded stereo movie soundtracks.

Notes:

•

Pro Logic II mode is available for a 2ch input signal

which is encoded in Dolby Digital or PCM format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

EX/ES

This mode provides 6.1 channel surround for

DOLBY DIGITAL EX, DTS-ES encoded source

material such as DVD.

This mode cannot be used when an analog input

has been selected.

Dolby Digital EX

In a movie theater, film soundtracks that have

been encoded with Dolby Digital surround EX

technology are able to reproduce an extra channel

which has been added during the mixing of the

program.

This channel, called Surround Back, places

sounds behind the listener in addition to the

currently available front left, front center, front

right, surround right, surround left and subwoofer

channels.

This additional channel provides the opportunity

for more detailed imaging behind the listener and

brings more depth, spacious ambience and sound

localization than ever before.

Dolby Digital EX is not available in the system

without surround back speaker(s).

DTS-ES (Discrete 6.1, Matrix 6.1)

DTS-ES adds the surround center channel audio to

the DTS 5.1-channel format to improve the acoustic

positioning and makes acoustic image movement

more natural with the 6.1-channel reproduction.

This receiver incorporates a DTS-ES decoder,

which can handle DTS-ES Discrete-encoded and

DTS-ES Matrix-encoded program sources from

DVD, etc..

DTS-ES Discrete 6.1 features digital discrete

recording of all channels including the surround back

channel(s) and higher quality of audio reproduction.

DTS-ES is not available in the system without a

surround back speaker.

dts MODE

(dts, Neo:6 Cinema, Neo:6 Music)

This mode is for DTS encoded source materials

such as LASER DISC, CD, and DVD. Neo:6 is for

some 2 channel sources.

dts : This mode is enabled when playing source

materials encoded in dts multichannel.

Playing multi-channel encoded 5.1-channel dts

sources provides five main audio channels (left,

center, right, surround left and surround right) and

Low Frequency Effect channel.

dts-ES decoding is not available in this mode.

The DTS mode cannot be used when an analog

input has been selected.

Neo:6 Cinema, Neo:6 Music

This mode decodes 2-channel signals into 6-

channel signals using high-accuracy digital matrix

technology.

The DTS NEO:6 decoder has near-discrete

properties in the frequency characteristics of the

channels as well as in channel separation.

According to the signals to be played back, DTS

NEO:6 uses either the NEO:6 CINEMA mode

optimized for movie playback or the NEO:6 MUSIC

mode optimized for music playback.

Note:

•

Neo:6 mode is available to 2ch input signals which

are encoded in Dolby Digital or PCM format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

USING THE SLEEP TIMER

To program the SR5400 for automatic standby,

press the SLEEP button on the remote.

Each press of the button will increase the time

before shut down in the following sequence.

The sleep time will be shown for a few seconds in

the display on the front panel, and it will count

down until the time has elapsed.

When the programmed sleep time has elapsed,

the unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and

the SLEEP indicator will disappear.

NIGHT MODE

Press the NIGHT button on the remote to turn on

the NIGHT mode.

Selecting the Night Mode ON is effective in Dolby

Digital only, and it compresses the dynamic range.

This softens loud passages such as sudden

explosions, to help prevent disturbing others late at

night.

To turn off the Night mode, press the NIGHT button

again.

OFF 10 20 30 40

90 80 70 60 50

OSD

SLEEP

MUTE

AMPAUX

TUNER

TAPE

CDR/MD

DVD

VCR1

DSS/VCR2

VOL.

MAIN

VOL.

TUNE/SEARCH

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN

6.1CH IN

STEREO

M-CH ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES DSP

DTS

S-DIRECT

AUTO

321

654

T.TONE

MENU OFF

SETUP/

OSD

Marantz SR-5400 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info