Bedienungsanleitung Marantz SR-5400 (Seite 25 von 36) (Englisch)

6574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

MULTI CH. ST

This mode is used to create a wider, deeper and

more natural soundstage from two channel source

material.

This is done by feeding the left channel signal to

both left front and left surround speaker and the

right channel signal to both right front and right

surround speaker. Additionally, the center channel

reproduces a mix of the right and left channel.

CIRCLE SURROUND

(CS

-CINEMA, CS

-MUSIC,

-MONO)

Circle Surround is designed to enable multi-

channel surround sound playback of non-encoded

and multi-channel encoded material.

ackward compatibility provides listeners with up to

6.1 channels of surround performance from your entire

collection of music and film, including broadcast,

videotape and stereo recorded music.

Depending on source material, you can select CSII-

Cinema mode, CSII -Music mode or CSII-Mono

mode.

Note:

•

CS II mode is available for 2ch input signals which

are encoded in Dolby Digital or PCM format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

VIRTUAL

This mode creates a virtualized surround sound

experience from a two-speaker (front L and R)

playback system playing any multi-channel audio

source (such as found on DVDs and digital

broadcasts), including Dolby Digital, Dolby Pro Logic

or DTS.

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right channels

play normally when PCM-audio or analog stereo is

input.

With Dolby Digital and DTS sources, the 5.1 multi-

channels are converted to two channel stereo. 96

kHz PCM source material can be played back in

stereo mode.

S (SOURCE ) - DIRECT

In the source direct mode, the tone control circuit

and bass management configuration are bypassed

for full range frequency response and the purist

audio reproduction.

96 kHz PCM source material can be played back in

this mode.

Notes:

• Internal speaker size is setup to front L/R = Large,

Center = Large, Surround L/R = Large and

Subwoofer = Yes automatically. Tone controls

and additional processing are also defeated.

• When you use this mode with certain DVD and CD

players, performing operations such as “Skip” or

“Stop” may momentarily interrupt the output.

CAUTION

NOTE for DTS signal

* Connected DVD-player, laser-disc player or CD-

player needs to support DTS-digital output. You

may not be able to play some DTS source

signals from certain CD players and LD players

even if you connect the player to the SR5400

digitally. This is because the digital signal has

been processed (such as the output level,

sampling frequency, or frequency response)

and the SR5400 cannot recognize the signal as

DTS data.

* Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

* While signals from DTS-laser disc or CD are

playing in another Surround mode, you cannot

switch to digital input or from digital input to

analog input by INPUT SETUP in SETUP MAIN

MENU or the A/D button.

* The outputs for the VCR 1 OUT, DSS/VCR 2

OUT, TAPE OUT, and CD-R OUT output analog

audio signals. Do not record from CDs or LDs

that support DTS using these outputs. If you do,

the DTS-encoded signal will be recorded as

noise.

NOTE for Dolby Digital Surround EX signal

* When playing Dolby Digital Surround EX-

encoded software in 6.1 channels, it is required

to set the EX/ES mode.

* Note that some of Dolby Digital Surround EX-

encoded software does not contain the

identification signal. In this case, set the EX/ES

mode manually.

NOTE for 96kHz PCM audio

* AUTO, Source- DIRECT, and STEREO modes

can be used when playing PCM signals with a

sampling frequency of 96 kHz (such as from

DVD-Video discs that contain 24 bit, 96 kHz

audio). If such signals are input during playback

in one of the other surround modes, output from

SR5400 will be muted.

* Certain DVD player models inhibit digital output.

For details, refer to the player’s operation

manual.

* Some DVD formatted discs feature copy

protection. When using such discs, 96 kHz PCM

signal is not outputted from the DVD player. For

details, refer to the player's operation manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5400 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info