Bedienungsanleitung Marantz SR-5600 (Seite 21 von 41) (Englisch)

6578

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT AND COMPONENT VIDEO INPUT)

4 digital inputs and 2 component video inputs can

be assigned to a desired source.

Use this menu to select the digital input jack to be

assigned to the input source.

Select “INPUT SETUP” in SETUP MAIN

MENU with or cursor button, and press

the ENTER button.

To select the input source, press the or

cursor buttons.

To select the digital input jack, press the or

cursor buttons.

Select “Dx-AT” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “Dig x”, when only a digital signal will be

used.

Select “ANA” for input sources for which

no digital input jacks are used.

To select the vdieo source, select “COMP1” or

“COMP2” by pressing the

or cursor

buttons, and press the or cursor buttons

to select the vdieo source to be assigned .

After you complete this portion of the set up,

move the cursor to MAIN with the or

cursor buttons and press the ENTER button.

Notes:

• The TUNER, AUX1 and AUX2 are fixed to the

analog input, and cannot be selected for any

digital input.

• When a DTS-LD or DTS-CD is playing, this setup

is not available. This is to avoid noise being

generated from the analog input.

• If “Dx-AT” is selected and a DVD, compact disc

or LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such

cases, change the setting to DIGITAL.

2 SPEAKER SETUP

After you have installed the SR5600, connected all

the components, and determined the speaker

layout, it is now time to perform the settings in the

Speaker Setup menu for the optimum sound

acoustics for your environment and speaker

layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

2-1 SPEAKERS SIZE

When setting the speaker size in the SPEAKER

SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel

you are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting

lower than approx. 100 Hz will be output from

the subwoofer.

If the Subwoofer is set to “NONE” and the front

speakers are set to “LARGE,” then the sound

will be output from both the left and right

speakers.

Select “SPEAKER SETUP” in SETUP MAIN

MENU with

or cursor button, and press

the ENTER button.

To select the each speaker, press the or

cursor buttons.

To select the setting of each speaker size,

press the

or cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the

cursor buttons and then press the ENTER

button to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is fixed to “LARGE.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

NONE:

Select if no surround back left and right

speakers are connected.

2CH:

Select if the surround back left and right

speakers are connected.

1CH:

Select if the one surround back speaker is

connected.

In this case, the audio signal is emitted form the

Surround L output terminal.

Notes:

• If “NONE” is selected for the Surround L/R

setting, then this setting is fixed to “NONE.”

• You can use surround back speaker terminals as

multi room speaker terminals when you use no

surround back speaker. (See page 16)

SURR. BACK SIZE

LARGE:

Select if the surround back speaker is large.

SMALL:

Select if the surround back speaker is small.

Note:

• If “NONE” is selected for the Surround L/R

setting, then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the

cutoff frequency for the small speakers used.

Select one of the crossover frequency levels

according to the size of the small speaker

connected.

80Hz:

Select this when the bass speaker is about 12

cm (4 3/4 inches).

100Hz:

Select this when the bass speaker is about 10

cm (3 15/16 inches).

120Hz:

Select this when the bass speaker is about 8 cm

(3 3/16 inches).

Notes:

• Use the above comments as reference when

adjusting.

• If Pure-Direct mode, 7.1CH Input is in use, this

function does not take effect.

BASS MIX

• The bass mix setting is only valid when

“LARGE” is set for the front speakers and “YES”

is set for the subwoofer during stereo playback .

This setting has effect only during playback of

PCM or analog stereo sources.

• When “BOTH” is selected, the low frequencies

will be played through the main L&R, as well as

the sub woofer.

In this playback mode, the low frequency range

expand more uniformly through the room, but

depending on the size and shape of the room,

interference may result in a decrease of the

actual volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play

through the main L&R ONLY.

Note:

• LFE signals during playback of Dolby Digital or

DTS, will be played through the sub woofer.

1INPUTSETUP

CD : D4 - AT TV : ANA

TAPE :ANA DVD :D3-AT

CD-R :D1-AT VCR1 :ANA

DSS : D2 - AT

COMP 1 : DVD

COMP 2 : DSS

MA I N EX I T

2-1 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L /R : LARGE

CENTER : SMALL

SURROUND L /R : SMALL

SURR.BACK : 2CH

SURR.BACK S I ZE : SMALL

LPF /HPF : 100 HZ

BASS M I X : BOTH

MA I N NE X T EX I T

SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 18 Adobe PageMaker 6.5J/PPC

Marantz SR-5600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info