Bedienungsanleitung Marantz SR-5600 (Seite 23 von 41) (Englisch)

6578

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

7 MULTI ROOM

SR5600 has features in MULTI ROOM SYSTEM

such as source selector, sleep timer, Multi Room

Speaker output and remote control.

You can set these feature in this sub-menu.

Select “MULTI ROOM” in the SETUP MAIN

MENU with

or cursor button, and press

the ENTER button.

To Select desired contents, press or

cursor button

AUDIO:

Select the audio source of the Multi-room output

with

or cursor buttons.

SLEEP TIMER:

SLEEP timer function is available during the

multiroom is active, set the time with or

cursor buttons.

MULTI (MULTI ROOM):

To switch on the Multi-room output ON or OFF,

press or cursor button.

VOL (VOLUME SETUP):

Select whether the Multi-room output level is

variable or fixed with a or cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the Multi-room output level with or

cursor buttons.

MSPK B (MULTI SPEAKER B):

To switch on the Multi-speaker B output ON or

OFF, press or cursor buttons.

Note:

• This setting can be changed when the Surr Back is

set “NONE” in 2-1 SPEAKER SIZE menu.

When this setting is unavailable, “✽✽✽” is

displayed

VOL (VOLUME SETUP):

Select whether the Multi-speaker output level is

variable or fixed with a

or cursor buttons.

Note:

• This setting can be changed when the Surr Back is

set “NONE” in 2-1 SPEAKER SIZE menu.

When this setting is unavailable, “✽✽✽” is

displayed

4 SURROUND

Select “SURROUND” in the SETUP MAIN

MENU with the or cursor buttons, and

press the ENTER button.

To select a desired content , press the or

cursor buttons.

SURR.MODE:

Select the desired surround mode with the

cursor buttons.

HT-EQ:

Select to active the HT-EQ with the or cursor

buttons.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is

because film soundtracks were designed to be

played back in large movie theater environments.

Activating the HT-EQ feature when watching a

film made for movie theaters corrects this and

restores the correct tonal balance.

The HT-EQ feature is available except in the

following modes.

• 7.1 CH INPUT

• PURE-DIRECT

• When VIRTUAL is set for the surround mode

LFE LEVEL:

Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the or

cursor buttons.

After you complete this portion of the set up, move

the cursor to “MAIN” with the or cursor buttons

and press the ENTER button.

5 PL II (PRO LOGIC II )

MUSIC PARAMETER

Pro Logic II-Music mode creates a rich and

enveloping surround ambience from stereo

sources such as CDs.

In this

mode, SR5600 includes three controls to

fine-tune the soundfield as follows.

Select “PL II MUSIC” in the SETUP MAIN MENU

with the

or cursor buttons, and press the

ENTER button.

PARAMETER:

Select “DEFAULT” or “CUSTOM” with the or

cursor buttons.

If you select “CUSTOM”, you can adjust three

parameters as listed below.

PANORAMA:

Select the Panorama mode On or Off with the

or cursor buttons.

Panorama wraps the sound of the front left and right

speakers around you, for an exciting perspective.

DIMENSION:

Set the Dimension level between 0 and 6 level in

1 level intervals with the or cursor buttons.

Adjust the soundfield either towards the front or

towards the rear.

This can be useful to help achieve a more

suitable balance from all the speakers with

certain recordings.

CENTER WIDTH:

Set the Center width level between 0 and 7 in 1

level intervals with the or cursor buttons.

Center Width allows you to gradually spread the

center channel sound into the front left and right

speakers.

At its widest setting, all the sound from the

center is mixed into the left and right.

This control may help achieve a more spacious

sound or a better blend for the front image.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then

this setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the ENTER button.

6 CS II (CIRCLE SURROUND II )

PARAMETER

Select “CS II ” in the SETUP MAIN MENU with

the or cursor buttons, and press the

ENTER button.

To Select desired contents as below, press

the or cursor buttons.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in

1 level interval with the

or cursor buttons.

TRUBASS produced by the speakers are an

octave below the actual physical capabilities of the

speakers adding exciting, deeper bass effects.

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 in 1

level intervals with the or cursor buttons.

This can be popped out of the surround audio

effects, allowing the listener to easily discern what

the actors say.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the

ENTER

button.

4 SURROUND

SURR . MODE : AUTO

HT - EQ : OFF

LFE LEVEL : 0 dB

MA I N E X I T

6CSII PARAMETER

TRUBASS : 0

SRS D I ALOG : 0

MA I N E X I T

7MULTI ROOM

AUD I O : DVD

SLEEP T IMER : OFF

MU L T I : OF F MS PK B :

✽✽✽

VOL :VAR I VOL : ✽✽✽

L EVEL : - 9 0dB LEVEL : ✽✽✽

- ---MAIN-ROOM STATUS----

V I DEO : DVD AUD I O : DVD

MA I N E X I T

5PL II MUS I C PARAME T ER

PARAMETER : DEFAULT

PANORAMA : OFF

DIMENSION : 3

CENTER WI DTH : 3

MA I N E X I T

SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 20 Adobe PageMaker 6.5J/PPC

Marantz SR-5600 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info