Bedienungsanleitung Marantz SR-6400 (Seite 20 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

SURR. L:

Set the distance from the surround left speaker to

your normal listening position between 1 and 30

feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-

meter intervals).

SURR. R :

Set the distance from the surround right speaker

to your normal listening position between 1 and

30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-

meter intervals).

SUB W :

Set the distance from the subwoofer to your

normal listening position between 1 and 30 feet in

1.0-foot intervals

(0.3 to 9 meters in 0.3-meter intervals).

SURR. BACK:

Set the distance from a surround back speaker

to your normal listening position between 1 and

30 feet in 1.0-foot intervals (0.3 to 9 meters in

0.3-meter intervals).

Notes

• For the speakers that you have selected "None"

the Speaker Size menu will not appear.

2-3 SPEAKERS LEVEL

ere you will set the volume for each speaker so

that they are all heard by the listener at the same

level. We recommend using a SPL (Sound Pressure

Level) meter, when available.

Note:

• The speaker level settings are not available in 6.1

channel input mode and S-Direct mode.

TEST MODE :

Selects “MANUAL” or “AUTO” for generating

the mode of the test tone with the or cursor

buttons.

If you select “AUTO” , the test tone will be cycled

through in a circular pattern which is Left →Center

→ Right → Surround Right → Surround Back →

Surround Left → Subwoofer → Left →..

increments of 3 seconds for each channel.

Using the or cursor buttons, adjust the volume

level of the noise from the speaker so that it is the

same level for all the speakers.

If you select “MANUAL”, adjust the output level of

each speaker as listed below.

When you move the cursor to FRONT L by

pressing the cursor button, the SR6400 will

emit a pink noise from the front left speaker.

Remember the level of this noise and then

press the cursor button.

(Note that this can be adjusted to any level

between -10 and +10 dB in 1 dB intervals

except the subwoofer setting. The subwoofer

can be adjusted to any level between -15 and

+10 dB in 1 dB intervals.)

The SR6400 will now emit the pink noise from

the center speaker.

Using the and cursor buttons, adjust the

volume level of the noise from the center

speaker so that it is the same level as the front

left speaker.

Press the cursor button again. The SR6400

will now emit the pink noise from the front right

speaker.

Repeat steps 2 and 3 above for the front right

and other speakers until all speakers are

adjusted to the same volume level.

After you complete this portion of the set up, press the

OK button, the cursor will move to “MAIN” and then

press the OK button to go to SETUP MAIN MENU.

Notes:

• Speakers that you selected “None” for in the

Speaker Size menu will not appear.

• To adjust the speaker levels for 6.1-channel input

sources, you will need to use the 6.1CH-INPUT

sub menu. (See page 18).

2-2 SPEAKERS DISTANCE

Use this parameter to specify the distance of each

speaker’s position from the listening position. The

delay time is automatically calculated according to

these distances.

Begin by determining the ideal or most commonly

used seating position in the room.

This is important for the timing of the acoustics to

create the proper sound space that the SR6400

and today’s sound systems are able to produce.

Note : For speakers that you have selected “None”

the Speaker Configuration sub-menu will not appear

here. (There are several useful books and special

DVD and LD’s available to guide you through proper

home theater configuration. If you are unsure, have

your Marantz dealer perform the installation for you.

They are trained professionals familiar with even

the most sophisticated custom installations.

Marantz recommends the WWW.CEDIA.ORG

website for further information about this).

To select each speaker , press the or cursor

buttons.

To set the distance for each speaker , press

the or cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the or cursor

buttons and then press the OK button to go to

the next page.

FRONT L :

Set the distance from the front left speaker to

your normal listening position between 1 and 30

feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-

meter intervals).

FRONT R :

Set the distance from the front right speaker to

your normal listening position between 1 and 30

feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-

meter intervals).

CENTER :

Set the distance from the center speaker to your

normal listening position between 1 and 30 feet

in 1.0 foot intervals (0.3 to 9 meters in 0.3-meter

intervals).

2 - 2 SPEAKERS D I STANCE

FRONT L : 10 f t 3 . 0 m

FRONT R : 10 f t 3 . 0 m

CENTER : 1 0 f t 3 . 0 m

SURR . L : 1 0 f t 3 . 0 m

SURR . R : 10 f t 3 . 0 m

SUB W : 10 f t 3 . 0 m

SURR . BACK : 1 0 f t 3 . 0 m

MA I N RETURN NEXT EX I T

2-3 SPEAKERS LEVEL

T EST MODE : MANUAL

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR .R : 0 dB

SURR . BACK : 0 dB

SURR . L : 0 dB

SUB W : 0 dB

MA I N RE TURN E X I T

3 PREFERENCE

Select “PREFERENCE” in the SETUP MAIN

MENU with the or cursor buttons, and press

the OK button.

To select a desired content, press the or

cursor buttons.

STANDBY MODE:

When this function is set to “ECONOMY”, you

can reduce the power consumption when the

unit is in the standby mode.

Note:

• TV-AUTO and RS-232C are disabled in the

“ECONOMY” setting.

TV AUTO:

Select the TV AUTO ON/OFF function to enable

or disable with the or cursor buttons. (refer to

page 23)

OSD Info:

Select the OSD information function to enable or

disable with the or cursor buttons.

If you select “ENABLE”, the SR6400 will display

the status of the feature (Volume up/down, input

select, etc..) on the TV monitor. But if you do not

desire this information, select “DISABLE ”.

After you complete this portion of the set up, move

the cursor to “MAIN” with the or cursor buttons

and press the OK button.

3PREFERENCE

S TANDBY MODE : ECONOMY

TV-AUTO :

∗∗∗ ∗∗∗

∗∗∗

OSD I NFO : ENABLE

MA I N E X I T

Marantz SR-6400 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info