Bedienungsanleitung Marantz SR-6400 (Seite 26 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to

the TV-VIDEO in jack to control the power (ON/

OFF) to the SR6400.

AUTO POWER ON

Be sure the TV auto mode is ENABLED.

(Refer page 17 : System Setup)

Connect your TV TUNER (etc) to the TV-VIDEO

in terminal. Be sure to connect the VIDEO input.

Turn OFF the power to the TV TUNER and the

SR6400.

Turn ON the TV TUNER and tune in a receivable

station.

When the station is received, the SR6400

turns ON and TV is selected automatically.

AUTO POWER OFF

In the above situation, turn the TV TUNER

OFF or select a channel that does not contain

any broadcast.

The power to the SR6400 switches to STANDBY

after approx. 5 minutes.

Notes:

• AUTO POWER OFF is canceled if the SR6400 is

set to a source other than TV.

The function reactivates when TV is selected again.

• Some TV broadcasts may cause the TV AUTO

FUNCTION to turn ON.

• The S-Video terminal does not support “TV AUTO

ON/OFF” function.

ATTENUATION TO ANALOG INPUT

SIGNAL

If the selected analog audio input signal is greater

than the capable level of internal processing, the

“PEAK” indicator will light up on the front display.

If this happens, you should press the ATT button

on the front panel or on the remote.

“ATT” indicator will be illuminated when this

function is activated. The signal-input level is

reduced by about half. Attenuation will not work

with the output signal of TAPE-OUT, CD-R/MD-

OUT, VCR1-OUT and DSS/VCR2-OUT.

This function is memorized for each individual

input source.

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the SR6400’s

output through a pair of headphones. Be certain that

the headphones have a standard 1/4" stereo phono

plug. (Note that the speakers will automatically be

turned off when the headphone jack is in use.)

Notes:

• When using headphones, the surround mode will

change to STEREO and TruSurround (TS)

headphones by SURROUND MODE selector.

• The surround mode returns to the previous setting

as soon as the plug is removed from the jack.

VIDEO ON/OFF

When no video signal is connected to the SR6400

or a DVD, etc., is connected directly to your TV, the

unnecessary video circuit can be turned off by

selecting the “VIDEO OFF” setting.

To select video off, press the V-OFF on the remote.

DISPLAY MODE

You can select the display mode for the front display

of the SR6400.

To select this mode, press the DISP. on the remote

control.

When this button is pressed, the display mode is

switched in the following sequence.

→ Surround Mode → Auto-display Off → Display

Off → Input Function → Surround Mode....

In Auto display off mode, the display is off. But, if

you make a change to the unit such as input or

surround mode, the display will show that change,

then go back to off after about 3 seconds. When

changing the volume, it is not displayed.

In Display off mode, the display is off completely.

Notes:

• Only the DISP indicator will be illuminated on the

front display in display off condition

AV SURROUND RECEIVER SR6400

SELECTOR

MEMORY

TUNINGCLEAR

POWER ON/STANDBY

PHONES

ENTER

STANDBY

SELECT

DSS/VCR2

AUX

VCR1

DVD

A/D6.1CH INPUTSPEAKERS A/B

VOLUME

DOWN

MODE

MUTE

AUX INPUT

S-VIDEO VIDEO L AUDIO R

ATT

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

F/P

UND RECEIVER SR6400

MEMORY

TUNING

MODE

CLEAR

ONES

TER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTSPEAKERS A/B

F/P

DISP MULTI AUTO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 SPKR AB EQ

DIGITAL

SURROUND

PCM

SL S SR

LFE

AV SURROUND RECEIVER SR6400

MEMORY

TUNINGCLEAR

PHONES

ENTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

S-DIRECT

A/D6.1CH INPUTSPEAKERS A/B

F/P

DISP MULTI AUTO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 SPKR AB EQ

DIGITAL

SURROUND

PCM

SL S SR

LFE

SELECTING ANALOG AUDIO INPUT

OR DIGITAL AUDIO INPUT

If you have already assigned the digital inputs, you

can temporarily select the audio input mode for

each input source with the A/D button on the remote

controller or front panel.

When this button is pressed, the input mode is

switched in the following sequence.

→ Digital Auto → Digital → Analog → Digital Auto....

In Digital Auto mode, the types of signals being

input to the digital and analog input jacks for the

selected input source are detected automatically.

If no digital signal is being input, the analog input

jacks are selected automatically.

In Digital mode, input is fixed to an assigned digital

input terminal.

In analog mode, the analog input jacks are selected.

This selecting is temporary, so the result will not be

stored in memory.

If you need to change the input mode completely,

use SYSTEM SETUP in OSD menu system. (see

page 16)

ROUND RECEIVER SR6400

MEMORY

TUNING

MODE

CLEAR

PHONES

ENTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTSPEAKERS A/B

F/P

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-6400 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info