Bedienungsanleitung Marantz SR-6400 (Seite 28 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

BASIC OPERATION

(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.

Default setup is 10 kHz step, if your country’s

standard is 9 kHz step, Press TUNER button on

the remote more than 6 seconds. Scan step will

change.

Note:

•

Preset memory for the tuner will clear by changing

this setup.

AUTO TUNING

(Using the SR6400)

To select tuner and desired band (FM or AM),

press the TUNER button on the front panel.

F/P button on the front panel to display the

frequency.

Press the TUNING or button on the front

panel for more than 1 second to start the Auto

tuning function.

Automatic searching begins then stops when

a station is tuned in.

(Using the remote control unit)

To select tuner and desired band (FM or AM),

press the TUNER button twice within in two

seconds on the remote.

Press the

5 or

for more than 1 second on

the remote.

Automatic searching begins then stops when

a station is tuned in.

If tuning does not stop at the desired station, use

to the “Manual tuning” operation.

MANUAL TUNING

(Using the SR6400)

To select tuner and desired band (FM or AM),

press the TUNER button on the front panel

Press the F/P (Frequency/Preset) button on

front panel, to have the frequency appear on the

display.

Press the TUNING or buttons.

(Using the remote control unit)

To select tuner and desired band (FM or AM),

press the TUNER button twice within in two

seconds on the remote.

Press the

5 or

6 on the remote to tune in the

desired station.

DIRECT FREQUENCY CALL

To select tuner and desired band (FM or AM),

press the TUNER button twice within two

seconds on the remote.

Press the F.DIR on the remote, display will

show “FREQ - - - -”.

Input your desired station’s frequency with the

ten numbered keypad on the remote.

The desired station will automatically be tuned.

DOWN

MEMORY

TUNING

MODE

MUTE

S-VID

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTS A/B

F/P

3. 2. 1.

DOWN

MEMORY

TUNING

MODE

MUTE

S-VI

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTS A/B

F/P

3. 2. 1.

(FM) TUNING MODE (AUTO STEREO OR MONO)

When in the auto stereo mode, AUTO indicator will

be illuminated on the display.

The “ST” indicator is illuminsted when a stereo

broadcast is tuned in.

At open frequencies, the noise is muted and the

“TUNED” and “ST” indicators are not illuminated.

If the signal is weak, it may be difficult to tune into the

station in stereo. In such a case, press the MODE

button on the front panel or press the T.MODE button

on the remote.

“AUTO” indicator is not illuminated, if FM stereo

broadcasts are received in monaural and the “ST”

indicator is not illuminated.

To return to auto stereo mode, press the MODE

button or press T.MODE button on the remote again.

AUTO indicator is illuminated the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations

in any order.

For each station, you can memorize the frequency

and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM

band and enters all stations with proper signal

strength into the memory.

VOLUME

DOWN

MODE

MUTE

AUX INPUT

S-VIDEO VIDEO L AUDIO R

ATT

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

F/P

AV SURROUND RECEIVER SR6400

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX INPUT

S-VIDEO VIDEO L AUDIO R

ATT

SELECT

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTSPEAKERS A/B

F/P

2.4.2.5. 1. 3.

To select FM , press the TUNER button on the

front panel.

While pressing the MEMORY button, press

the TUNING button up.

“AUTO PRESET” will appear on the display,

and scanning starts from the lowest frequency.

Each time the tuner finds a station, scanning

will pause and the station will be played for

five seconds.

During this time, the following operations are

possible.

The band can be changed by the TUNER button.

If no button is pressed during this period, the

current station is memorized in location Preset

02.

If you wish to skip the current station, press the

TUNING button during this period, this station

is skipped and auto presetting continues.

Operation stops automatically when all 50

preset memory positions are filled or when auto

scanning attains the highest end of all bands. If

you desire to stop the auto preset memory at

anytime, press the CLEAR button.

MANUAL PRESET MEMORY

(Using the SR6400)

Tune into the radio station you desire (Refer to

the “MANUAL TUNING” or “AUTO TUNING”

section).

Press the MEMORY button on the front panel.

“– –“ (preset number) starts blinking on the

display.

Select the preset number by pressing the

TUNING or button, while this is still blinking

(approx. 5 seconds)

Press the MEMORY button again to enter.

The display stops blinking.

The station is now stored in the specified preset

memory location.

RECEIVER SR6400

MEMORY

TUNING

CLEAR

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

S-DIRECT D

A/D6.1CH INPUTSPEAKERS A/B

F/P

2. 4. 3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-6400 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info