Bedienungsanleitung Marantz SR-7200 (Seite 27 von 39) (Englisch)

6590

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

3. Press the DVD Function button ,.

4. Press the PLAY button ⁄0 (3 OK). The LEARN indicator changes

from blinking to continuously lit.

5. Press and hold the PLAY button on the DVD player’s remote

controller. The remote controller has finished learning the

command when OK appears on the LCD a.

• If AGAIN appears on the LCD, some error has prevented the

command from being learned. If this happens, simply repeat

the procedure from step 4.

• In the rare event that NG appears on the LCD, it means that

the remote controller you are attempting to learn from uses

special signals that cannot be learned by the Marantz remote

controller.

6. Follow the same procedure to make the remote controller learn

the ten-key ⁄7 operation used by the DVD player’s remote

controller.

7. Repeat the procedure from step 3 to have the remote controller

learn the signal codes for the other components such as TV, VCR,

etc.

• If no buttons are pressed for approximately 1 minute while in

the LEARN mode, the remote controller automatically returns

to the USE mode.

• When programming the function buttons, first switch to the

desired function, then press the button again.

8. When you have finished programming the remote controller, use a

ballpoint pen or other sharp point to once again press the MODE

button z to return it to the USE mode. The LCD displays the USE

indicator, and the newly programmed codes now can be used.

If FULL is displayed on the LCD

If FULL is displayed on the LCD b when programming in the LEARN

mode, it means that the memory has become too full to hold any

further codes.

If FULL is displayed no matter how many times you attempt to enter

new codes, it means that the remote controller cannot accept any new

codes until some of the previously learned codes are deleted to make

space in the memory. Select unneeded codes for each of the Jog Dial

control n and Function buttons ,, which show FULL and delete

them from the memory.

Note:

The power ON and OFF buttons c can only be programmed to

learn one type of code, regardless of the function button that has

been selected.

PROGRAMMING THE JOG DIAL

Let’s use the example of setting as the TITLE code for the DVD

player.

1. Use a ballpoint pen or other sharp point to press the MODE button

z until the LEARN indicator is displayed and starts to blink.

2. Place the DVD player’s remote controller so that its infrared

transmitter window is facing the infrared signal receiver window

on the Marantz remote controller at a distance of about 5

centimeters (2 inches).

3. Press the DVD Function button ,.

4. Rotate the Jog Dial n left or right until is displayed, then press

the ENT button m.

• The LEARN and NAME indicators will both be displayed.

5. Press the TITLE button on the DVD player’s remote controller

continuously until OK is displayed on the Marantz remote

controller’s LCD, indicating that the programming has been

completed.

• If AGAIN appears on the LCD, some error has prevented the

command from being learned. If this happens, simply repeat

the procedure from step 4.

When the programming has been completed, the remote

controller automatically switches to the NAME mode.

The left hand position on the LCD b blinks, indicating the

character in the name to be rewritten.

• If you do not wish to rewrite the name, simply press the OK

Cursor button ⁄0.

• If you wish to rewrite the name, input the desired characters

using the ten-key pad ⁄7. The part of the display that is being

rewritten may be selected using the < and > Cursor buttons

⁄0. When you are finished rewriting, press the OK Cursor

button ⁄0.

To simply erase already existing characters, press the 0

button to replace them with a blank space.

(Refer to next section on rewriting names)

6. Use the same procedure to program the codes for other 1-6 with

the Jog Dial n.

7. When finished programming the codes for each of the buttons,

use a ballpoint pen or other sharp point to press the MODE button

z to return the remote controller to the USE mode. Once USE is

displayed on the LCD, the newly memorized codes are available

for use.

VOL

DVD

CD-R/MD

MEMO

CLEAR

GUIDE

MUTE

DVD

CD-R/MD

DSS T V

VCR

AMP

TUNER

TAPE

AUX

AUTO

DTS

CS5.1

6.1

DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-7200 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info