Bedienungsanleitung Marantz SR-7200 (Seite 29 von 39) (Englisch)

6590

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

3. Erasing Jog Dial Codes

To clear all codes and names previously set for each of the

functions (DVD, TV, etc.).

1) Press the function you want to erase.

2) Hold down the CLEAR button ⁄5 and press both ENT buttons

m at the same time. LCD b will display CLR?.

3) If you wish to continue the clearing operation, press the OK

Cursor button ⁄0. This will return all 10 commands in the Jog

Dial to their factory presets, or leave them empty if no factory-

presets are available. Accordingly, the LCD b will return to

the factory preset displays, or will simply be empty.

• Use a similar operation to erase the Jog Dial codes for each

function.

• To cancel the memory clearing operation, do not press OK

Cursor button ⁄0 and simply touch any other button.

4. Erasing Code s by Function

To clear all codes and names previously set for each of the

functions (DVD, TV, etc.), press and hold the CLEAR button ⁄5,

then press the button for the function to be cleared twice. CLR?

will appear on LCD b. If you wish to continue the clearing

operation, press the OK Cursor button ⁄0.

This will return the button to its factory-presets or leave it empty if

no factory presets are available. Accordingly, the LCD b will

return to the factory preset displays, or will simply be empty.

• To cancel the memory clearing operation, do not press the OK

Cursor button ⁄0 and simply touch any other button.

• The codes for the < • 3 button ⁄1 cannot be cleared.

5. Erasing All Memory Contents

To clear all the memory contents and reset all codes and names to

their factory presets, press and hold the CLEAR button ⁄5, and

press both the power ON and OFF buttons c simultaneously.

ACLR? will appear on LCD a.

If you wish to continue the clearing operation, press the OK

Cursor button ⁄0.

This will return the entire memory to its factory-presets, or leave it

empty for items for which no factory presets are available.

Accordingly, the LCD will return to the factory-preset display or will

simply be empty.

• To cancel the memory clearing operation, do not press the OK

Cursor button ⁄0 and simply touch any other button.

After the OK Cursor button ⁄0 is pressed, clearing the entire

memory will take approximately 5 seconds.

PROGRAMMING MACROS

Macros make it possible to use a single function button to perform

more complex series of operations that would normally require

pressing several buttons. A single button can be programmed to

perform up to 10 steps in sequence. A typical example of such a series

might be as follows:

• Turn the main amplifier power ON → Switch the function to DVD →

Set the Surround Mode to Pro Logic → Switch the TV to video input

→ Set the DVD player to PLAY.

• No signals may be transmitted during macro programming.

• The various steps that make up a macro are set initially to be sent

one after another in 1 second intervals, however these intervals

may be shortened to as little as 0.5 seconds or lengthened to as

much as 5 seconds using the Setup mode.

• In the macro mode, the number of steps the macro contains is

displayed on LCD c. Macros may be programmed for each of the

11 function buttons, from DVD to AMP.

1. Use a ballpoint pen or other sharp point to press the MACRO

button x until the MACRO and LEARN indicators are displayed

blinking on the LCD.

2. Press the Function button , for which you wish to program a

series of operations. In this case, let’s use the example of the DVD

player.

Press the DVD Function button ,. The LCD a will display DVD-

Characters displayed on LCD a include the following, depending

on the function button for which the macro is being programmed:

LD-M, DVD-M, TV-M, DSS-M, VCR-M, AUX-M, TUN-M, CD-M,

TP-M, AMP-M, CDR-M (or MD-M for remote controller set for

MD).

• If a macro has already been set for the selected function button,

the LCD a will blink. Also, the number of steps in the macro is

displayed on LCD c.

MEMO

CLEAR

GUIDE

MUTE

ENT

VOL

DVD

CD-R/MD

DSS T V

VCR

AMP

TUNER

TAPE

AUX

2CH OSD SLEEP2CH

AUTO

DTS

CS5.1

6.1

DSP 6

STEREO

CLEAR

ENT

VOL

DVD

CD-R/MD

MEMO

CLEAR

GUIDE

MUTE

DVD

CD-R/MD

DSS T V

VCR

AMP

TUNER

TAPE

AUX

AUTO

DTS

CS5.1

6.1

CLEAR

DVD

OFF

ON / OFF

SOURCE

MACRO

MODE

POWER

LEARNING REMOTE

CONTROL RC

7200SR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-7200 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info