Bedienungsanleitung Marantz SR-9300 (Seite 7 von 14) (Englisch)

6612

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

THX AUDIO SETUP

OSD menu system has an additional setup screen “THX AUDIO

SETUP” on the 2nd page of SPEAKER SETUP.

You can select setting of Boundary Gain Compensation and

Advanced Speaker Array.

Boundary Gain Compensation

THX ULTRA2 SUB-W : Yes or No

If you have a THX Ultra2 certified subwoofer (or other subwoofer with

flat anechoic response to 20 Hz), select “YES”.

If YES you can chose to activate B.G.C. (Boundary Gain

Compensation)

If NO, Boundary Gain Compensation may not be activated and the

feature is locked out.

B.G.C. : On or Off

OFF: Boundary Gain Compensation is not applied.

ON: Boundary Gain Compensation is applied.

Notes

• If you set Subwoofer = No in SPEAKER SIZE setup menu,

Boundary Gain Compensation will not be activated.

• If you set THX ULTRA2 SUB-W : Yes, The Bass Peak Level

setting is not operational.

ADVANCED SPEAKER ARRAY

SURR.B SPKR : TOGETHER, CLOSE or APART

The best ASA effect is when the Surround Back speakers are together

and facing forward.

If distance between Surround back speakers is,

• Less than 12 in. (30 cm): TOGETHER

• Greater than 12 in. (30 cm), and less than 48 in. (122 cm): CLOSE

• Greater than 48 in. (122 cm): APART

Speaker type and positioning

This diagram shows the desired positioning for 7.1 channel speaker

systems used in A. S. A. (Advanced Speaker Array) mode. During

system set-up, select the distance between Surround Back speakers.

Note:

• If you set SURR.BACK = 1CH or No in SPEAKER SIZE setup

menu, Advanced Speaker Array will not be activated.

2-3 SPEAKERS DISTANCE

FRONT L : 10 f t 3. 0 m

FRONT R : 10 f t 3 . 0 m

CENTER : 10 f t 3 . 0 m

SURR . L : 1 0 f t 3 . 0 m

SURR . R : 1 0 f t 3 . 0 m

SUB W : 10 f t 3 . 0 m

SURR . B L : 10 f t 3 . 0 m

SURR . B R : 10 f t 3 . 0 m

MA I N RETURN NEXT EX I T

SPEAKER DISTANCE (TIME ALIGNMENT)

Use this parameter to specify the distance of each speaker’s position

from the listening position. The delay time is automatically calculated

according to these distances.

Begin by determining the ideal or most commonly used seating

position in the room.

This is important for the timing of the acoustics to create the proper

sound space that the SR9300 and today’s sound systems are able to

produce.

Note that the speakers that you selected “No” or “None” for in the

Speaker Config sub-menu will not appear here.

(There are several usefull books and special DVD and LD’s available

to guide you through proper home theater configuration. If you are

unsure, have your Marantz dealer perform the installation for you.

They are trained professionals familiar with even the most

sophisticated custom installations. Marantz recommends the

WWW.CEDIA.ORG website for further information about this).

To select the each speaker , press Up or Down cursor button.

To set the distance for each speaker , press the Left or Right

cursor buttons.

If you finish these setup, move cursor to “NEXT” with Up or Down

cursor button and then press OK button to go to next page.

Front –L : Set the distance from the front left speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Front –R : Set the distance from the front right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Center : Set the distance from the center speaker to your normal

listening position between 1 and 30 feet in 1.0 foot

interval

(0.3 to 9 meters in 0.3-meter intervals).

Surr Left : Set the distance from the surround left speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Surr Right : Set the distance from the surround right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

Subwoofer : Set the distance from the subwoofer to your normal

listening position between 1 and 30 feet in 1.0-foot

intervals

(0.3 to 9 meters in 0.3-meter intervals).

Surr BACK: Set the distance from a surround back speaker to your

normal listening position between 1 and 30 feet in 1.0-

foot intervals (0.3 to 9 meters in 0.3-meter intervals).

Surr B L : Set the distance from the surround back left speaker to

your normal listening position between 1 and 30 feet in

1.0-foot intervals (0.3 to 9 meters in 0.3-meter

intervals).

Surr B R : Set the distance from the surround back right speaker

to your normal listening position between 1 and 30 feet

in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter

intervals).

Notes

• Speakers that you selected "No" or "None" for in the Speaker

Size menu will not appear.

• The setting of Surr.Back L and Surr.Back R appears if set for

two surround back speakers in the Speaker Size menu.

• The setting of Surr.Back appears if set for one surround back

speaker in the Speaker Size menu.

2 - 2 THX AUD I O SETUP

BOUNDARY GA I N COMP

T HX ULTRA2 SUB–W : YES

B.G.C. : ON

ADVANCED SPKR ARRAY

SURR . B SPKR : TOGETHER

MA I N RETURN NEXT EX I T

SBL SBR

Surround B

Surround A

Surround-L Surround-R

Surround A

Di-polar Radiating Speaker

Direct Radiating Speaker

Front-L Center Front-R

Surround Back

Marantz SR-9300 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-9300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info