Bedienungsanleitung Marantz SR14 MKII (Seite 23 von 35) (Englisch)

522824

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

ENGLISH

SYSTEM SETUP 1/2

VCR1 OUT : Select the video source from the VCR1 output with <

or > button for video and audio dubbing to the VCR1

deck.

The source is switched in the following sequence.

SOURCE → TV → LD → DVD → DSS/VCR2 → AUX

→ SOURCE → .....

To determine each source, display the desired

source and press the ^ or v button.

TAPE OUT : Select the audio source from the TAPE output with <

or > button for audio dubbing to the tape deck. The

source is switched in the following sequence.

SOURCE → TUNER → CD → CD-R/MD → SOURCE

→ ....

To determine each source, display the desired

source and press the < or > button.

DIG. OUT : Select the digital source from the DIGITAL output

with < or > button for digital dubbing to a CD-R

recorder or MD deck.

The source is switched in the following sequence.

SOURCE → DIG.1 → DIG.2 → DIG.3 → DIG.4 →

OFF→ SOURCE →

To determine each source, display the desired

source and press the ^ or v button.

TV AUTO: This product is equipped with a TV-auto ON/OFF

system, which automatically turns on or off the SR-

14mkII power 1 second (for ON) and up to to 5

minutes (for OFF) after the TV video input signal is

present or absent.

Switch the TV AUTO ON/OFF function to enable or

disable with or button. To use this function, connect

the TV video input to TV tuner’s video output.

OSD Info : If you select enable, SR-14mkII will display the

status of the feature (Volume up/down, input select,

etc..) on the TV monitor.

But if you do not desire this information , select

“DISABLE “.

S.P.C. : System Power Control : If you select “ENABLE”, the

SR-14mkII will output a power On/Off command for

a CD player, MD player, or DVD player, from the

remote output terminal.

If you have corresponding marantz products , you

can turn them on/off simultaneously with SR-14mkII.

6CH. INPUT: 6 channel direct inputs on the SR-14mkII share the

front channel of the desired source.

Select the desired source with < or > button.

DIGITAL 6 : The input of the Digital 6 terminal is commonly used

with an AC-3 RF input or Coaxial Digital Input.

If Digital 6 is connected to the AC-3 RF output of a

LD player, select “ RF “ with < or > button.

If you desire to connect this terminal to the digital

output of a CD player, DVD player, SAT tuner or

etc… . select “ COAXIAL “.

SYSTEM SETUP 2/2 (ASSIGNABLE DIGITAL INPUT)

Six digital inputs can be assigned as the desired source.

Use this menu to set the SR-14mkII for connected equipment and

type of connection.

Example:

When the digital output of a DVD player is connected to Digital 4

(input jack) of the SR-14mkII and an AC-3 RF output and optical

digital output from a LD player are connected to AC-3 RF(Dig.6) and

Dig.1.

1. Move the cursor on the DVD with ^ or v button, and select

DIGITAL4 with <, > button.

2. Move the cursor on the “LD” with ^ or v button, and select RF with

< button, and select DIGITAL1 with > button.

(Move the cursor with ^ or v button, input is determine.)

Notes

• The TUNER and AUX are fixed to the analog input, and cannot

be selected for any digital input.

The RF input is available for LD , and can be linked with Digital

1,2,3 ,4 or 5.

If the RF input is linked with any Digital input, once the RF signal

is not supplied, the SR-14mkII will switch from the RF input to the

digital input automatically.

• If you connect an LD player, you should connect not only the RF

output (if it has one) but also the Digital output.

Laser Discs which are not encoded with Dolby Digital will then

send the sound through the digital output (PCM audio). If the

disc you are playing is old and doesn’t have a digital soundtrack,

you must connect the L/R analog outputs on the laser disc player

to the laser disc analog inputs on the SR-14mkII.

• When a DTS-LD or DTS-CD is playing, this setup is not available.

This is to avoid noise being generated from the analog input.

In this case, the DTS audio must be played through the player’s

digital output to the digital input on the SR-14mkII. This is

because the DTS soundtracks replace the standard PCM

soundtracks on DTS discs.

• The SR-14mkII does not switch from digital input to analog input

or vice versa automatically.

In case both digital and analog inputs are connected to the SR-

14mkII,if you desire to switch to analog input temporarily, you

can do so by pressing the A/D button.

• If you select “Digital-6: COAXIAL” in Setup 1/2. RF is not

available in this page.

MEESS STTUPY

EX IT

1/2

VCR1 OUT SOURCE

:OUT SOURCE

OUT SOURCE

TAPE

DIG

TV AUTO

DISABLE

:ENABLEOSD I NFO

S.P.C.

CH I

NPUT

OFF

TAL

RUNTER NEXT

MEESS STTUPY

EX IT

2/2

TAPE

DSS

:LD

DVD

VCR1

RUNTER

4DIGITAL

DIGITAL

ANALOG

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR14 MKII Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info