Bedienungsanleitung Marantz SR4003 (Seite 28 von 48) (Englisch)

61338

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

SETUP

5 PL

x (PRO LOGIC

MUSIC PARAMETER

Pro Logic IIx-Music mode creates a rich and

enveloping surround ambience from stereo sources

such as CDs.

In this mode, this unit include three controls to ﬁ ne-

tune the soundﬁ eld as follows.

5 PLIIx MUSIC PARAMETER

PARAMETER : DEFAULT

PANORAMAA : OFF

DIMENSION : 0

CENTER WIDTH : 3

MAIN EXIT

Select “PL

x MUSIC” in the SETUP MAIN MENU

with the 3 or 4 cursor buttons, and press the ENTER

button.

PARAMETER:

Select “DEFAULT” or “CUSTOM” with the 1 or 2

cursor buttons.

If you select “CUSTOM”, you can adjust three

parameters as listed below.

PANORAMA:

Select the Panorama mode On or Off with the

1 or 2 cursor buttons.

Panorama wraps the sound of the front left and right

speakers around you, for an exciting perspective.

DIMENSION:

Set the Dimension level between +3 and –3 level in

1 level intervals with the 1 or 2 cursor buttons.

Adjust the soundﬁ eld either towards the front or

towards the rear.

This can be useful to help achieve a more

suitable balance from all the speakers with certain

recordings.

CENTER WIDTH:

Set the Center width level between 0 and 7 in 1

level intervals with the 1 or 2 cursor buttons.

Center Width allows you to gradually spread the

center channel sound into the front left and right

speakers.

At its widest setting, all the sound from the center

is mixed into the left and right.

This control may help achieve a more spacious

sound or a better blend for the front image.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the 3 or 4 cursor buttons and

press the ENTER button.

7 7.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for 7.1-

channel input sources.

Here you will adjust the volume for each channel so

that they are all heard by the listener at the same

level.

7 7.1 CH. INPUT LEVEL

VIDEO-IN : LAST

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR.R : 0 dB

SURR.B R : 0 dB

SURR.B L : 0 dB

SURR.L : 0 dB

SUB W : 0 dB

MAIN EXIT

Select “7.1CH INPUT” in the SETUP MAIN

MENU with the 3 or 4 cursor buttons, and

press the ENTER button.

To select “VIDEO IN”, press 3 or 4 cursor

button.

Using the 1 or 2 cursor buttons, select the

video input source which is emitted from

Monitor out in the 7.1 CH INPUT function.

The input source is switched by pressing the

1 or 2 cursor buttons as follows;

LAST ↔ TV ↔ DVD ↔ VCR ↔ DSS ↔ AUX1

↔ V-OFF ↔ LAST ↔

Notes:

•

When select LAST, the source is set previous source

before 7.1 CH INPUT function

is activated.

•

When select V-OFF, no signal is emitted from monitor

out terminal.

To Select desired channel , press the 3 or 4

cursor buttons.

Using the 1 or 2 cursor buttons, adjust the

volume level of each channel.

After you complete this portion of the set up,

move the cursor to “MAIN” with the 3 or 4

cursor buttons and press the ENTER button.

Notes:

•

These settings will be memorized to 7.1CH INPUT

source.

• This feature can be directly selected with the

CH.SEL button of the remote controller.

6 CS

(CIRCLE SURROUND

) PARAMETER

6 CSII PARAMETER

TRUBASS : 0

SRS DIALOG : 0

MAIN EXIT

Select “CS

” in the SETUP MAIN MENU

with the 3 or 4 cursor buttons, and press the

ENTER button.

To Select desired contents as below, press the

3 or 4 cursor buttons.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in 1

level interval with the 1 or 2 cursor buttons.

TRUBASS produced by the speakers are an octave

below the actual physical capabilities of the speakers

adding exciting, deeper bass effects.

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 in 1

level intervals with the 1 or 2 cursor buttons.

This can be popped out of the surround audio

effects, allowing the listener to easily discern what

the actors say.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the 3 or 4 cursor buttons and

press the

ENTER

button.

SR4003_U_01_E2_2.indd 25SR4003_U_01_E2_2.indd 25 08.6.20 5:06:27 PM08.6.20 5:06:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR4003 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR4003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info