Bedienungsanleitung Marantz SR5004 (Seite 33 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS SETUP

ENGLISH

SETUP

2-2 MANUAL SETUP

1. Select “Speaker Setup” from the Main

Menu.

2. Select “Manual Setup” with the 3 or 4

cursor buttons.

3. Press the ENTER button to enter the

selection.

Manual Setup

Speakers Size

Speakers Distance

Speakers Level

Return

: Up / Down : Enter : Select Exit : Exit

4. Select the sub-menu with the 3 or 4 cursor

button, and press the ENTER button.

5. Select Speaker Size with the 3 or 4 cursor

button from the Manual Setup menu, and

press the ENTER button.

Speakers Size

Subwoofer

Front

Front Height

Center

Surround

Surround Back

Surround Back Size

LPF / HPF

Bass Mix

Return

: Yes

: Small

: 2ch

: Small

: 80Hz

: * * *

: Up / Down : Change Enter : Exit : Exit

When setting the speaker size in the Speaker Size

menu, use the guidelines below.

Large:

The complete frequency range for the channel you

are setting will be output from the speaker.

Small:

Frequencies of the channel you are setting that are

lower than approx. 80 Hz will be output from the

subwoofer.

If the Subwoofer is set to “No” and the front

speakers are set to “Large”, then the sound will be

output from both the left and right speakers.

Subwoofer

Yes:

Select when a subwoofer is connected.

No:

Select when a subwoofer is not connected.

Front

Large:

Select if the front speakers are large.

Small:

Select if the front speakers are small.

Note

• If “No” is selected for the subwoofer setting, then

this setting is ﬁ xed at “Large.”

Front Height

None:

Select if no front height speaker is connected.

Large:

Select if the front height speaker is large.

Small:

Select if the front height speaker is small.

Note

• If “Zone SPKR” is selected for Surround Back

speakers, then this setting is ﬁ xed to “None”.

Center

None:

Select if no center speaker is connected.

Large:

Select if the center speaker is large.

Small:

Select if the center speaker is small.

Surround

None:

Select if no surround speakers are connected.

Large:

Select if the surround speakers are large.

Small:

Select if the surround speakers are small.

Surround Back

None:

Select if no surround back speakers are connected.

1ch:

Select if one surround back speaker is connected.

In this case, the audio signal is emitted from the

SURR BACK LEFT SPEAKER terminal.

2ch:

Select if the surround back left and right speakers

are connected.

Zone SPKR:

Select if using the SURROUND BACK SPEAKER

terminal as ZONE SPEAKER A.

Note

• If “None” is selected for the Surround setting,

then this setting is ﬁ xed to “None.”

Surround Back Size

Large:

Select if the surround back speakers are large.

Small:

Select if the surround back speakers are small.

Note

• If “None” is selected for the Surround setting,

then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the

cutoff frequency for the small speakers used. Select

one of the crossover frequency levels according to

the size of the small speakers connected.

40Hz → 60Hz → 80Hz → 100Hz → 120Hz → 140Hz

→ 160Hz → 180Hz

Note

• If using small front speakers, set a slightly higher

frequency. If using large front speakers, set a

slightly lower frequency.

Bass Mix

• The bass mix setting is only valid when “Large”

is set for the front speakers and “Yes” is set for

the subwoofer during stereo playback.

This setting has effect only during playback of

PCM or analog stereo sources.

• When “Both” is selected, the low frequencies

will be played through the main L&R speakers

and the subwoofer.

In this playback mode, the low frequency range

expands more uniformly throughout the room,

but depending on the size and shape of the room,

interference may result in a decrease of the actual

volume of the low frequency range.

• By selecting “Mix”, the low frequencies will play

through the main L&R only.

Note

• LFE signals during playback of Dolby Digital or

DTS will be played through the subwoofer.

6. Select each speaker with the 3 or 4 cursor

buttons.

7. Set the size of each speaker with the 1 or 2

cursor buttons.

8. After you complete this portion of the

setup, move the cursor to “Return” with

the 3 or 4 cursor buttons and press the

ENTER button to display the Manual Setup

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info