Bedienungsanleitung Marantz SR5004 (Seite 31 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS SETUP

ENGLISH

8. Repeat step 7 until measuring up to 6 points

measuring the main listening position

and other positions where people will

commonly listen.

When all measurements end, the following

GUI appears on the display.

Audyssey MultEQ Setup

Calculate

: : Enter : OK Exit : Exit

Speaker Check : OK

Select “Calculate” with the 3/4 cursor

buttons and press the ENTER button to

calculate measurement results. During

calculations, the following GUI appears on

the display.

Audyssey MultEQ Setup

--------------

Now Calculating!

: : Enter : Exit :

Notes

• Fewer than 6 positions may be measured, but it

is recommended to measure in all 6 positions for

best results. Measuring in fewer than 3 position

is not recommended as it does not provide enough

acoustical information for good correction.

• The time needed to complete calculations

depends on the number of connected speakers and

measured listening positions. The more speakers

and listening positions, the more time is needed.

9. Checking Measurement Results

When calculations for the measurement

results end, a screen appears for conﬁ rming

the calculation results.

Check Result

Speakers Configuration

Speakers Size

Speakers Distance

Channel Level

Crossover Frequency

Store

: Up / Down : Enter : Select Exit : Exit

Select items to check with the 3/4 cursor

buttons and press the ENTER button to

enter them.

Note

To check equalizer (MultEQ

) parameters, see

page 38.

[Example]

Conﬁ rmation screen for speaker detection

Speakers Configuration

Check Speaker Results

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back

Surround Left

Subwoofer

Return

: : Enter : Return

: Yes

: No

: Yes

: No

: Yes

Exit : Exit

[Example]

Conﬁ rmation screen for speaker size.

Speakers Size

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Return

: : Enter : Return

: Auto

Exit : Exit

[Example]

Conﬁ rmation screen for the distance from speakers

to the listening position

Speakers Distance

Unit

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Subwoofer

Return

: Up / Down : Enter : Return

: Meters

: 30.0 ft

: 19.3 ft

: 29.6 ft

: 21.5 ft

: 12.3 ft

: 11.6 ft

: 16.3 ft

: 12.5 ft

Exit : Exit

The units can be changed by moving the cursor

to Meters of Unit and pressing 1 / 2 the cursor

buttons. Each time a 1 / 2 cursor button is pressed,

the units alternate between Feet and Meters.

Note

This system cannot measure a distance of 9.15 m

(30.0 ft) or higher. In this case, >9.15 m (>30.0 ft)

is displayed.

[Example]

Conﬁ rmation screen for channel level.

Channel Level

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Subwoofer

Return

: : Enter : Return Exit : Exit

: 0.0dB

: -6.5dB

: 0.0dB

: -1.5dB

: +1.0dB

: +9.5dB

: +12.0dB

: -2.5dB

: -12.5dB

[Example]

Conﬁ rmation screen for crossover frequency.

Crossover Frequency

Front

Front Height

Center

Surround

Surround Back

Return

: : Enter : Return

: Auto

Exit : Exit

* Auto is displayed to indicate that the speaker

size and crossover frequency results were

automatically measured.

10. Storing Measurement Results in Memory

Once ﬁ nished conﬁ rming the measurement

results, select “Return” with the 3/4 cursor

buttons and press the ENTER button to

display the Check Result screen.

Check Result

Speakers Configuration

Speakers Size

Speakers Distance

Channel Level

Crossover Frequency

Store

: Up / Down : Enter : OK Exit : Exit

Place the cursor on “Store” and press

the ENTER button to store all parameters

including the equalizer parameters in memory.

If not wanting to store the calculation results

in memory, press the Exit button.

Note

Pressing “Exit” prior to pressing “Store” erases

all measurement results and calculation results,

therefore operate the remote controller with care.

When storing operations end, the following GUI

appears on the display.

Speaker Setup

Auto Setup

Manual Setup

Return

: Up / Down : Enter : Select Exit : Exit

Note

•

Do not turn the power to the unit off while storing

parameters in memory. This may erase or corrupt

data in the unitʼs memory and may damage the unit.

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info