62166

Marantz SR7002 Seite 21

21
Zoom out
Zoom in
Vorherige Seite
1/94
Nächste Seite
ENGLISH
18
LEARN MODE
Programming the
2
(PLAY) and Other Control But-
tons and Numeric Buttons
This remote controller is capable of learning and
storing codes used by other remote controllers that
you already own.
For codes which are not learned, the remote
controller will transmit either the Marantz preset
codes from the initial settings, or remote codes from
another manufacturer’s AV equipment which is set
by the customer.
The receiver sensor for the remote control signals is
located at the top of the remote controller.
This example shows how to learn the codes from the
remote control of a DVD player.
LEARN
NAME
MACRO
USE
PAG E
1 23
4
LEARN
NAME
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1 2 4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
6 (When OK) (failed) (codes are full)
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D2 (LEARN) direct button.
The LEARN setting (LEARN) is displayed. The
LEARN
indicator then blinks.
3.
Press the DVD source button.
4.
Press the 2 (PLAY) button.
The
LEARN
indicator blinks, and then displays to
indicate that learning is ready.
5.
Place the receiver sensor of the remote control
(top) so that it is facing the transmitter of the
DVD remote control (top) at a distance of about
5 cm (2 inches).
6.
Press and hold down the 2 (PLAY) button of the
transmitting DVD remote control, and check that
OK is displayed on the LCD.
The remote controller has finished learning when
OK is displayed on the LCD.
If ERROR is displayed on the LCD, some error has
prevented the command from being learned. If this
happens, repeat the procedure for steps 4 and 5.
In some rare cases, ERROR may be displayed
repeatedly during the learning operation. In this
case, the transmitting remote control may have
special signal codes. These codes cannot be
learned by this remote controller.
7.
Follow the same procedure to make the remote
control learn the other buttons.
8.
Repeat the procedure in steps 3 to 6 to have
the remote control learn the signal codes from
a TV, CD player, or other AV equipment.
• When no buttons are pressed for
approximately one minute during the
learning operation, the remote controller
automatically returns to USE mode.
• When programming the source buttons,
switch to the source in step 3, and then
press the source button again.
9. When you have finished programming the
codes for each button, press the M button.
The
USE
indicator is displayed on the LCD, and the
newly stored codes can be used.
• If FULL is displayed on the LCD, the memory
cannot hold any more learned codes in
LEARN mode.
If FULL is displayed no matter how many
times you try the learning operation, the
remote controller cannot accept any more
new codes until some of the previously
learned codes are deleted from the memory.
Delete some of the learned buttons from the
sources.
The M button and > button cannot be taught. Only
each one code can be learned for the LIGHT buttons
1 and 2, regardless of the source.
Programming the Direct Buttons and Rewriting
Names
This example shows how to program codes from
other manufacturer products to the DVD MENU
button (D1) and change the display to OSD.
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
6 7 8
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D2 (LEARN) direct button.
The LEARN setting (LEARN) indicator is displayed.
The
LEARN
indicator then blinks.
3.
Press the DVD source button.
The first page of the direct button screen is
displayed. There are four available pages. Pressing
the > buttons cycles through the pages in this order
1
→
2
→
3
→
4
→
1.
4.
Press the D1 (MENU) direct button.
The
LEARN
indicator blinks, and then displays to
indicate that learning is ready.
5.
Place the receiver sensor of the remote control
(top) so that it is facing the transmitter of the
DVD remote control (top) at a distance of about
5 cm (2 inches).
6.
Press and hold down the OSD button of the
transmitting DVD remote control, and check that
OK is displayed on the LCD.
The remote controller has finished learning when
OK is displayed on the LCD.
If ERROR is displayed on the LCD, some error has
prevented the command from being learned. If this
happens, repeat the procedure for steps 4 and 5.
• After learning is completed, the remote
controller automatically switches to name
rewriting mode. The left end “ ” indicator on
the MENU blinks to indicate that the blinking
part can be rewritten.
• If no names will be rewritten, press the
OK cursor button. The display returns to
learning standby mode by pressing the OK
cursor button.
7.
To change the name, press the numeric
buttons to enter the text.
• Use the cursor buttons 1 2 to move to the
sections to be rewritten on the LCD.
• To change MENU to OSD, press the 5
numeric button.
Each time the button is pressed, the display
cycles through M → N → O → 5 → M.
8.
After rewriting of the text is completed, press
the OK cursor button.
To delete text that is already entered, press the
0
button to insert a space.
• In this example, MENU is changed to “OSD
(space) (space)” in this step, and then OSD
is displayed in the right side by pressing the
OK button.
For details, refer to the section “Rewriting Names”.
9.
In the same way, use the > button to select
the page, and then press the direct button to
program the codes.
10.
After programming the codes for each of the
buttons, press the M button.
The
USE
indicator displays on the LCD, and the
newly stored codes can be transmitted.
REWRITING NAMES
This remote controller allows the rewriting of names
for the sources and direct buttons. This operation is
performed for each individual source.
This example shows how to change the source name
from DVD to AVD and AUDIO to SOUND.
LEARN
NAME
MACRO
USE
PAG E
123
4
3 4 5
LEARN
NAME
MACRO
USE
PAG E
123
4
7 8 9
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D3 (NAME) direct button .
SR7002-8002_U_01_ENG 1_3.indd 18SR7002-8002_U_01_ENG 1_3.indd 18 07.8.24 1:14:49 PM07.8.24 1:14:49 PM
… 21 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz SR7002 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Marantz SR7002

Marantz SR7002 Bedienungsanleitung - Holländisch - 74 seiten

Marantz SR7002 Bedienungsanleitung - Französisch - 84 seiten

Marantz SR7002 Bedienungsanleitung - Spanisch - 84 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info