Bedienungsanleitung Marin Bikes (Seite 18 von 54) (Englisch)

780517

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

WARNING: Some people have claimed that extended riding

with a saddle which is incorrectly adjusted or which does not

support your pelvic area correctly can cause short-term or

long-term injury to nerves and blood vessels, or even

impotence. If your saddle causes you pain, numbness or other

discomfort, listen to your body and stop riding until you see

your dealer about saddle adjustment or a different saddle.

C. Handlebar height and angle

Your bike is equipped either with a “threadless” stem, which clamps on to

the outside of the steerer tube, or with a “quill” stem, which clamps inside

the steerer tube by way of an expanding binder bolt. If you aren’t absolutely

sure which type of stem your bike has, ask your dealer.

If your bike has a “threadless” stem

(g. 6) your dealer may be able to change handlebar height by moving

height adjustment spacers from below the stem to above the stem, or vice

versa. Otherwise, you’ll have to get a

stem of different length or rise. Consult

your dealer. Do not attempt to do this

yourself, as it requires special knowledge.

If your bike has a “quill” stem (g. 7)

you can ask your dealer to adjust the

handlebar height a bit by adjusting stem

height.

A quill stem has an etched or stamped

mark on its shaft which designates the

stem’s “Minimum Insertion” or “Maximum

Extension”. This mark must not be visible

above the headset.

WARNING: When making saddle angle adjustments with a

single bolt saddle clamp, always check to make sure that the

serrations on the mating surfaces of the clamp are not worn.

Worn serrations on the clamp can allow the saddle to move,

causing you to lose control and fall.

Always tighten fasteners to the correct torque. Bolts that are

too tight can stretch and deform. Bolts that are too loose can

move and fatigue. Either mistake can lead to a sudden failure of

the bolt, causing you to lose control and fall.

Note: If your bicycle is equipped with a suspension seat post, the

suspension mechanism may require periodic service or maintenance. Ask

your dealer for recommended service intervals for your suspension seat

post.

Small changes in saddle position can have a substantial effect on

performance and comfort. To nd your best saddle position, make only one

adjustment at a time.

WARNING: After any saddle adjustment, be sure that the saddle

adjusting mechanism is properly seated and tightened before

riding. A loose saddle clamp or seat post clamp can cause

damage to the seat post, or can cause you to lose control and

fall. A correctly tightened saddle adjusting mechanism will

allow no saddle movement in any direction. Periodically check

to make sure that the saddle adjusting mechanism is properly

tightened.

If, in spite of carefully adjusting the saddle height, tilt and fore-and-aft

position, your saddle is still uncomfortable, you may need a different saddle

design. Saddles, like people, come in many different shapes, sizes and

resilience. Your dealer can help you select a saddle which, when correctly

adjusted for your body and riding style, will be comfortable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marin Bikes Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info