Bedienungsanleitung Marmitek SW10 (Seite 3 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

494308

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

3SW10

USER MANUAL SW10 SHUTTER SWITCH

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and extremely dangerous. Never

connect the module when plugged into the mains. Always turn off the main switch before

starting the installation.

• This product is for professional use and should be installed by a certified installer.

• To prevent short circuits, this product should only be used inside and only in dry spaces.

Do not expose the components to rain or moisture. Do not use the product close to a bath,

swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or bright

light sources.

• Do not open the product: the device contains live parts. The product should only be

repaired or serviced by a qualified repairman.

• In case of improper usage or if you have opened, altered and repaired the product yourself,

all guarantees expire. Marmitek does not accept responsibility in the case of improper usage

of the product or when the product is used for purposes other than specified. Marmitek

does not accept responsibility for additional damage other than covered by the legal

product responsibility.

• Automatic switching devices provide comfort, but can also be dangerous. They can surprise

people or can ignite clothing hanging over an electric heat source. Please be careful and take

appropriate measures to avoid accidents.

How does Marmitek X-10 work?

Marmitek X-10 components use the existing mains wiring to communicate (using Marmitek X-

10 signals). You can build a complete system using the three different kind of components of

the Marmitek X-10 System:

1. Modules: These components will receive Marmitek X-10 signals and will switch or dim

the attached lamp or appliance.

2. Controllers: These components will transmit Marmitek X-10 signals and thus will control

the Modules.

3. Transmitters: Wireless components like remotes. The signals of these components will be

received by a controller with transceiver functionality (IRRF 7243, TM13 or

console of a Marmitek Security System). The Transceiver will translate the

signals into Marmitek X-10 signals on the power line.

Addresses

You can select up to 256 addresses by setting two code wheels on the modules. The two code

wheels are dividing the address into a House Code ( A .. P) and a Unit Code (1 .. 16). On

Controllers the House Code is also selectable. When Modules and Controllers are set to the

same House Code they will work together.

The Marmitek X-10 System contains many standardized commands whereby modules set to the

same House Code will respond simultaneously (e.g. All lights on, all off).

Signal Range

Range of Marmitek X-10 signals over the Power Line and how to increase the range.

The Marmitek X-10 System is based on power line communication. The range of the

ENGLISH

SW10.qxd 02-11-2006 17:20 Pagina 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marmitek SW10 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info