750827
7
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
EN-5
Step on the device evenly near the center and keep your body still and erect until the
device stabiles your weight.
When the weight has been correctly measured, the weight will appear on the LCD display
A , ash 3 times indicating correct measuring.
Or you can press the “SET” button E on the device and wait until once the LCD display A
shows “0.0” indicating it is ready for use.
When the LCD display A shows “Err”, it is indicating the device is in overload protection.
The device will automatically switch off after ± 10 seconds.
Weight – body fat – hydration – muscle bone & kcal percentage
The device is equipped with a BIA (bioelectrical impedance analysis) technology, to
measure body fat, hydration, muscle and bone percentage, by sending a (safe) low tension
current through the body. The difference of electrical conductive property of body fat from
other tissues is analyzed and processed and results are displayed on the LCD screen.
Setting your personal data
Press the SET key E to set your personal data.
With the ▲ C or ▼ D button you can select the desired number or selection.
Program number
The device can store maximum 10 personal programs.
Press the SET key E
On the LCD screen A “P0” will ash. Press ▲ C or ▼ D the select the desired program
number (P0 – P9) to store your personal data. Once the desired program number appear,
press SET E to conrm.
Gender
When the LCD screen A ashes or press ▲ C or ▼ D to select the gender. Once
the correct gender has been selected, press SET E to conrm.
Age
When the LCD screen A shows “00” and “age” are blinking, press ▲ C or ▼ D the set
the age (18 - 100). Once the desired program number appears, press SET E to conrm.
Length
When the LCD screen A shows “100” and “cm” are blinking, press ▲ C or ▼ D the set
the length (100 – 220 cm). Once the desired program number appears, press SET E to
conrm.
Just select your program code when you use the device again and your information will be
displayed, so there is no need to set them again.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mascot Online MOL-PC-SCDFP01 Digital balance scale wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info