Bedienungsanleitung Max 31131 (Seite 52 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

789310

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Locate the table saw in a well-lit and level

area where you can maintain good footing

and balance. It should be installed in an area

that provides enough room to easily handle

the size of your workpiece. Cramped, dark

areas, and uneven slippery oors invite acci-

dents.

Frequently clean and remove sawdust from

under the saw table and/or the dust collecti-

on device. Accumulated sawdust is combusti-

ble and may self-ignite.

The table saw must be secured. A table saw

that is not properly secured may move or tip

over.

Remove tools, wood scraps, etc. from the

table before the table saw is turned on.

Distraction or a potential jam can be dange-

rous.

Always use saw blades with correct size and

shape (diamond versus round) of arbour ho-

les. Saw blades that do not match the moun-

ting hardware of the saw will run o-centre,

causing loss of control.

Never use damaged or incorrect saw blade

mounting means such as anges, saw blade

washers, bolts or nuts. These mounting me-

ans were specially designed for your saw, for

safe operation and optimum performance.

Never stand on the table saw, do not use it as

a stepping stool. Serious injury could occur if

the tool is tipped or if the cutting tool is acci-

dentally contacted.

Make sure that the saw blade is installed to

rotate in the proper direction. Do not use

grinding wheels, wire brushes, or abrasive

wheels on a table saw. Improper saw blade

installation or use of accessories not recom-

mended may cause serious injury.

Additional safety warnings

When mounting the saw blade, wear protec-

tive gloves. This poses a risk of injury.

Do not use HSS saw blades. Such saw blades

can easily break.

Only use saw blades that match the specica-

tions given in this operating manual and that

are tested and marked in accordance with EN

847-1

Never use the tool without the table insert.

Replace table insert if defective. Without a-

wless table inserts, injuries are possible from

the saw blade.

Keep your work area clean. Material mixtures

are particularly hazardous. Light metal dust

may catch re or explode.

Choose the saw blade suited to the material

you want to work on.

Only use saw blades that are recommended

by the power tool manufacturer and are

suitable for using on the material you want

to saw.

Only advance the workpiece towards the saw

blade when it is running. Otherwise there is

a risk of kickback occurring if the saw blade

catches in the workpiece.

Products sold in GB only:

Your product is tted with an BS 1363/A ap-

proved electric plug with internal fuse (ASTA

approved to BS 1362). If the plug is not sui-

table for your socket outlets, it should be cut

o and an appropriate plug tted in its place

by an authorized customer service agent.

The replacement plug should have the same

fuse rating as the original plug. The severed

plug must be disposed of to avoid a possible

shock hazard and should never be inserted

into a mains socket elsewhere.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Max 31131 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info