Bedienungsanleitung Maxview MXL002 OMNISAT DOME (Seite 20 von 22) (Englisch)

629542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

20 25

> PID Setting: When you press the “GREEN” button,

“PID” menu comes up. The values in this menu are set

automatically while searching, so it is not necessary to

change these values.

> AUDIO Setting: When you press the “YELLOW”

button, “Audio” menu comes up.

> “Mode” is “Stereo” unless any changes are made.

“Mode” can also be set to “Left”, “Right” or “Mono”

using “ ”/“ ” buttons.

> The volume of some programs may be higher or

lower than the others. This can cause the volume to

increase or decrease abruptly. In order to compensate

for such volume differences, the “Volume offset” op-

tion in the “Audio” menu can be used.

> When you increase the volume offset, the volume

of the program will increase, and when you decrease

the volume offset (with – values), the volume of the

program will decrease accordingly. When in “Volume

Offset”, adjust the volume difference between +10

and -10 by using “ ”/“ ” buttons.

> Access to Audio Tracks: Some programs can be

broadcast in several languages. Press the “OK” button

when you have highlighted “Audio Tracks”. Select the

language you want.

> Press “MENU” or “EXIT” button to exit from the

“Audio” sub-menu. A message, “Do you want to

store?” will be displayed if you have made any

changes. Press the “OK” button to store. Press

“MENU” or “EXIT” button to exit without storing the

changes.



✘

> SKIP: Press the “GREEN” button to enter

“Operation” menu in the “Channel List”. Select

by using “ ”/“ ” buttons, “Skip” operation is

activated. If there is a channel that you want to skip

while changing channels in the “Channel List”,

highlight that channel by using “✘”/“✘” buttons and

press the “OK” button. The channel name will be pre-

ﬁxed by the “ ” sign. This channel will be skipped

from now on when using the remote control handset.

However, you may still access that channel by entering

its number using the remote control.

> HIDE: Press the “GREEN” button to enter

“Operation” menu in the “Channel List”. Select by

using “ ”/“ ” buttons. If you select “Hide

Channels” option, “Hide” operation is activated. Each

channel you select via the “OK” button will be

hidden. If you select the “Show hidden chs.” option

you can see the hidden channels again. If you press

the “OK” button while on a hidden channel, that

channel becomes visible. If you select “Don’t show

hiddens” in the menu below the selected channels

become invisible again.

> Press “MENU” or “EXIT” button to exit the

“Channel List” menu. If you’ve made a change to the

“Channel List”, a message, “Do you want to save

changes” will appear on the screen. Press the “OK”

button to store the changes or press “MENU” or

“EXIT” button to exit without storing.



✘



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxview MXL002 OMNISAT DOME Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info