Bedienungsanleitung Maxview MXL002 OMNISAT DOME (Seite 21 von 22) (Englisch)

629542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

24 21

> Select “Search” in “Transponder” menu to begin the

scanning process for your selected transponder. All

the TV and Radio channels for that transponder will be

found and displayed on the screen.

> When the Scanning is completed, a message “...

channel(s) are found. Do you want to save them?”

will appear on the screen. If you press the “OK”

button, all the channels that have been found will be

stored. If a channel already exists in the memory it will

not be saved. If you press “MENU” or “EXIT” button,

no channels will be stored.

CHANGING PROGRAM SETTINGS

> Display the program to which you want to change

the settings.

> Enter the “Installation” menu from the “Main

Menu” and then “Manual Edit / Search” sub-menu.

> By using “ ”/“ ” buttons you can change

“Satellite”, “Frequency”, “Polarity” and “Symbol Rate”

information. When you enter correct information,

the Signal Quality and the Signal Strength levels will

appear in the bars at the bottom of the menu. By

pressing the “RED” button in this menu you can scan

a transponder at a particular frequency. If you press

the “BLUE” button, that channel will be added to the

end of the list as another channel.

> Scan TP: When you press the “RED” button, the

frequency that you have chosen will be scanned.



✘

RADIO

Pressing the “RADIO” button activates the “Only

Radio” mode. By using “✘”/“✘” and number buttons

you can select a radio channel. You can deselect the

radio mode by pressing the “RADIO” button again.

If you press the “RADIO” button again, “All” mode is

selected, and if you press the “RADIO” button again

“Only TV” mode is selected.

FAVOURITE CHANNEL LIST

> Press the “FAV” button, while there is no menu on

the screen. The “Favourite Selection” menu appears

on the screen. You can select your favourite group in

this menu and only select the channels that appear in

the selected group. If you want to see all the channels,

select the “All Channels” option.

> Press “MENU” or “EXIT” button to exit without

selecting any option.

SATELLITE SELECTION

> If you want to watch the programs of a particular

satellite, you can select that satellite from a list.

> Press the “SAT” button when there is no menu on

the screen. The “Satellite Selection” menu appears.

Highlight the satellite that you want by using “✘”/“✘”

buttons and pressing the “OK” button.

> You will see only the programs for the satellite that

you have chosen from the program list. If the option

“All Sats” is selected, you will be able to watch the

programs included for all the satellites.

> Press “MENU” or “EXIT” button to exit from the

satellite list.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxview MXL002 OMNISAT DOME Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info