Bedienungsanleitung Maxxmee BG-E-0220 - 08827 (Seite 14 von 32) (Deutsch, Englisch, Holländisch, Französisch)

769817

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

• If the device is not going to be used

for a prolonged period and before

storing it away, it is essential to

remove any remaining water from the

water tank (7) (see the “Cleaning the

Water Tank” chapter).

• Store the device in a clean, dry place

so that it is protected and is out of the

reach of children and animals when it

is not in use.

Cleaning the Water Tank

To clean the water tank (7), it needs to be

removed from the device.

1. Make sure that the device is not con-

nected to the mains power.

2. Take the cover (10) off the main unit(5)

(Picture C).

3. Remove the splash guard (9) from the

water tank (Picture C).

4. Carefully detach the cables of the

ultrasonic atomisers(1) from the cable

guide (2) on the edge of the water

tank. Then remove the ultrasonic

atomisers from the mounts.

5. Remove the water tank from the main

unit (Picture D).

6. Pour away any remaining water.

7. Clean the water tank thoroughly with

a little detergent and warm water.

8. Completely dry the water tank.

9. Insert the water tank into the main

unit.

10. Insert the ultrasonic atomisers into

the mounts in the water tank and their

cables into the cable guide. When

you do this, make sure that the ultra-

sonic atomisers are fully inserted and

are ﬁ tted straight.

11. Insert the splash guard into the water

tank and place the cover on the main

unit.

MAINTENANCE

The device must be kept operationally

ready. If a halogen lamp(11) or an ultra-

sonic atomiser (1) should be damaged,

they need to be replaced.

 More replacement parts can

be purchased via the following

website:

www.dspro.de/kundenservice

Replacing a Halogen Lamp

Please Note: When you touch and insert

a new halogen lamp (11), use gloves or a

cloth so that you do not compromise the

way that the halogen lamp works.

1. Make sure that the device is not con-

nected to the mains power and has

cooled down completely.

2. Take the cover (10) off the main unit(5)

(Picture C).

3. Remove the splash guard (9) from the

water tank (Picture C).

4. Twist the halogen lamp anticlockwise

to release it and pull it out.

5. Insert a new halogen lamp into the

socket and twist it clockwise to ﬁ x it

in place.

Replacing an Ultrasonic Atomiser

1. Make sure that the device is not con-

nected to the mains power and has

cooled down completely.

2. Take the cover (10) off the main unit(5)

(Picture C).

3. Remove the splash guard (9) from the

water tank (Picture C).

4. Carefully detach the cable of the

ultrasonic atomiser(1) from the cable

guide (2) on the edge of the water

tank (7). Then pull the ultrasonic

atomiser out of the mount.

5. Pull the cable out of the housing up

to the plug connection (PictureE).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxxmee BG-E-0220 - 08827 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Maxxmee BG-E-0220 - 08827

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info