Bedienungsanleitung MCZ ALEA AIR 7 XUP S1 (Seite 11 von 36) (Englisch)

812523

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

13-MENU ENTRIES AND OPERATION

d - Tones

This function is disabled by default. To enable it proceed as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Tones’’.

• Press “menu” to conrm.

• Using the + - keys, select “On/O”.

• Press “menu” to conrm and “esc” to exit.

e - External thermostat (see dedicated chapter)

f - Auto-Eco activation (see dedicated chapter)

To select the Auto-Eco function, proceed as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Scroll by using the arrows and select “Auto-Eco”.

• Press “menu” to conrm.

• Use the + - keys to select “On”.

• Press “menu” to conrm and “esc” to exit.

g - Eco stop t (see dedicated chapter)

To select the Eco stop t function, proceed as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Scroll with the arrows and select ‘’Eco stop t.

• Press “menu” to conrm.

• With the + - keys, insert the minutes (from 1 to 30’).

• Press “menu” to conrm and “esc” to exit.

AUTO ECO MODE (see activation and shutdown paragraph above)

For activation of the “Auto Eco” mode and time adjustment, see paragraphs f and g respectively.

The option ‘’ECO stop t” can be adjusted to ensure correct operation in the various environments in which the stove can be installed and to

avoid constant shut-downs and start-ups when the room temperature is subject to sudden change (drafts, poorly insulated rooms, etc.).

The ECO shutdown procedure is activated automatically when the power recall device is satised (room probe +1°C or external thermostat

with an open contact), the “ECO stop t starts to decrease the time (factory default 5 minutes, which can be changed from the “Settings”

menu). During this stage, the panel alternates between displaying ON with a small ame and Timer (if active) - Eco active. The minutes

counting down to Eco Stop are shown at the top of the display. The ame moves to P1 and remains there until the set “”ECO stop T” time

reaches zero, and if the conditions are still met, goes to the shutdown stage. The ECO stop count is cancelled if one of the devices recalls

power.

When the boiler begins to turn o, the panel displays: O - Eco Active - ashing small ame.

When the stove turns o, OFF-ECO appears on the display with the ame symbol o.

The following conditions have to be met simultaneously for ECO to restart:

• room probe -1°C or external thermostat with a closed contact (for at least 20” in order to prevent false recalls)

• 5 minutes have passed since shutdown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ ALEA AIR 7 XUP S1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ ALEA AIR 7 XUP S1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info