Bedienungsanleitung MCZ CLIO HYDRO 16 S2 (Seite 9 von 36) (Englisch)

812473

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

14-MENU ITEMS AND OPERATION

g - Eco Stop T

To select the Eco Stop T function, proceed as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Scroll with the arrows and select ‘’T Eco o’’.

• Press “menu” to conrm.

• Enter the minutes with the + - keys.

• Press “menu” to conrm and “esc” to exit.

AUTO ECO MODE

For activation of the “Auto Eco” mode and time settings, see paragraphs 8 f and 8 g respectively.

The ‘’ECO stop T’’ can be adjusted to ensure correct operation in the various environments in which the boiler can be installed and to avoid

constant stopping and starting when the room temperature is subject to sudden change (drafts, poorly insulated rooms, etc.).

The ECO stop procedure is activated automatically when all the power recall devices included in the “system conguration” are satised:

room temperature probe/external thermostat (congurations 1-2-3), ow switch (conguration 2), thermostat/ntc (10 kΩß3435) puer

(conguration 4-5) or thermostat/ntc (10 kΩ ß3435) boiler (conguration 2-3). If all the devices present are satised, the time begins

to decrease “T ECO stop” (10 minutes default, can be changed in the “Settings” menu). During this phase, the panel alternates between

displaying ON with a small ame and Crono (if active) - Eco active. The minutes counting down to the Eco Stop are shown at the top of the

display. The ame moves to P1 and remains there until the set “T Eco Stop” time reaches zero, and if the conditions are still satised, turns

o the boiler. The ECO stop count is cancelled if one of the devices recalls power.

When the boiler begins to turn o, the panel shows: O - Eco Active - ashing small ame.

When the boiler turns o, OFF-ECO appears on the display with the ame symbol o.

The following conditions have to be met simultaneously for the ECO to restart:

• Power recall

• 5 minutes have passed since shut-down.

• TH2O < TSetH2O.

• If the power is recalled by the domestic hot water (DHW), the 5’ are ignored and the boiler starts up as required.

NOTE: In conguration 4 - 5 the Auto Eco mode is enabled automatically. Also when in conguration 2 - 3, with the ‘summer’ function set,

it is enabled automatically. Where it is prescribed that it should be enabled, the mode cannot be disabled.

h - T Pump On

This option enables adjustment of the pump activation temperature.

Select the Pump On T function as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Scroll with the arrows and select “T Pump On”.

• Press “menu” to conrm.

• Use the + - keys to change the °C.

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

i - Auxiliary boiler

An additional module (optional) must be installed to allow the start-up of an auxiliary boiler when the main boiler is o or has been

stopped due to an alarm. The default settings have this function disabled. To enable the function, go to the settings menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ CLIO HYDRO 16 S2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ CLIO HYDRO 16 S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info