Bedienungsanleitung MCZ CLIO HYDRO 16 S2 (Seite 11 von 36) (Englisch)

812473

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

14-MENU ITEMS AND OPERATION

l - Maximum power

Allows you to set the maximum power limit of the ames which the boiler can use to reach the set target temperature.

Modify the power as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Scroll with the arrows and select ‘’Maximum power’’.

• Press “menu” to conrm.

• Change the power from 01 to 05 using the + - keys.

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

m - Components test

This can be done only when the boiler is o and allows you to select the components to be tested:

• Spark plug: it is turned on for a xed test period of 1 minjute during which the panel displays the countdown in seconds.

• Feed screw: it is powered for a xed period of 1 minute during which the panel displays the countdown in seconds.

• Extractor: it is activated at 2500 rpm for a xed period of 1 minute during which the panel displays the countdown in seconds.

• Exchanger: enables you to conduct the test in V5 for a xed period of 1 minute during which the panel displays the countdown in

seconds.

• Pump: it is activated for a xed period of 10 seconds during which the panel displays the countdown.

• 3-way valve: the 3-way valve is activated for a xed test period of 1 minute during which the panel displays the countdown in

seconds.

Enable the “Component test” function (only with boiler o) as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Component test’’

• Press “menu” to conrm.

• Use the + - keys to select the test to be carried out.

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

n - Chimney sweep Function

This function can only be activated when the boiler is on and power is supplied, and it forces operation of the boiler at the parameters

P5, with the ventilator (if present) in V5. Any corrections to the loading/smoke ventilation percentage must be read. This state lasts 20

minutes, the countdown is displayed on the panel. During this interval, the system ignores any thermostat/puer/room set point/ set

point H20 values, only the safety shut-down at 85°C remains active. The technician can stop this phase at any moment by quickly pressing

the on/o key. Enable the “Chimney sweeper” function as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Chimney sweeper function’’

• Press “menu” to conrm.

• Use the + - keys to select “On” (O by default)

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ CLIO HYDRO 16 S2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ CLIO HYDRO 16 S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info