PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
page 44
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
4.6. SETTINGS TO CARRY OUT BEFORE FIRST
LIGHTING
Once the power cord is connected to the rear part of the stove, place
the switch, also on the rear, to position (I).
The lighted button of the switch will come on.
The switch located to the rear of the stove powers the system.
The stove is off and on the panel the first screen appears with the word
OFF; by pressing any key the screen with the word MENU will appear.
4.6.1. Setting current day and time
By pressing the key concerning MENU the word SET will appear. Type
SET and the programme will appear to change:
hour
minutes
day
day of month
month
year
To modify the time, for example, when TIME appears on the display,
press SET, the time will begin to flash in the centre of the display. With
the lower left or right keys modify the hour and subsequently the
minutes, day etc… etc… in the same way and according to need. All the
modification made must be confirmed by pressing OK, otherwise
they will not be saved. The ESC key returns to the previous
screen without saving the modifications.
If for 10 seconds the keypad of the control
panel is inactive, it returns to the start
screen without saving the modifications.
TIME ADJUSTMENT
Esc Set
< Date setting >
Esc 01 Ok
- Hours +
Esc 01 Ok
- Minutes +
21.0°C 21.04
OFF
Mode:AUTO Menu
Temp:22°C Fan:A
21.0°C 21.04
OFF
