PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
page 31
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
4.8.4.1.
Activation /de-activation of ECO-STOP mode
This mode makes it possible to optimize stove consumption in well-
insulated rooms.
This operation can be selected whether your are in manual or
automatic mode by pressing and holding button 4 for 5 seconds.
The display of the remote control will show the message AUTO along
with the message ECOSTOP.
To disable the ECO-STOP function follow the same procedure.
4.9. HOT AIR VENTILATION
The Solar and Gea stove are equipped with an internal fan for
expulsion of heating air. It can be set to 5 different speeds at any time
regardless of the whether the stove is in manual or automatic mode.
To access the fan setting menu, press the button MENU 6 once and
the icon for ventilation will come on completely. In fact, normally
only the border of the symbol appears, since to access adjustment it is
necessary to access the corresponding menu.
5 speeds can be selected as well as an automatic function.
To select the speed, after pressing button 6, press button 5 up or down
to increase or decrease ventilation power. Variation of ventilation can
be seen by the number of bars above the fan symbol which will
increase or decrease as a result.
In addition to 5th speed there is an additional selection called AUTO
function. This function lets you connect the fan speed to the flame
power. With this option selected, the stove will independently select the
fan speed based on the flame power.
This option can be selected simply by again pressing the up arrow
button of button 5 once you are at the 5th ventilation speed. The
display of the remote control will show the message AUTO under the
fan symbol.
Example with ventilation set to AUTO:
If the flame is at power 3, the fan will automatically set to power 3. If
the flame is at power 5, the fan will automatically set to power 5, and
so on.
If the keypad is not touched for 7 seconds, the
remote control will automatically exit fan setting
mode and will confirm the last inserted setting.
In selecting the fan speed, it is advisable not to
select very low speeds (1st or 2nd) when the stove
is at maximum power as this may cause the
structure to overheat.
AUTO
