Bedienungsanleitung Medisana BU 550 CONNECT (Seite 26 von 36) (Deutsch, Englisch)

550248

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

There are many factors that can influence blood pressure. Readings can be affected

seriously by stress, fear, heavy physical exertion or the time of day at which the

measurements are taken. Your personal blood pressure values are subject to consi-

derable fluctuation during the course of the day and the year. These fluctuations

are particularly pronounced in the case of patients suffering from hypertension.

Blood pressure is usually at its highest during physical exertion and at its lowest at

night when you are asleep.

2.6 Fluctuations in blood pressure

Measure your blood pressure several times, then record and compare the results.

Do not draw any conclusions from a single reading. i

Your blood pressure readings should always be evaluated by a doctor who is also

familiar with your personal medical history. When using the unit regularly and

recording the values for your doctor, you should visit the doctor from time to time

to keep him updated. i

When taking readings, remember that the daily values are influenced by several

factors. Smoking, consumption of alcohol, drugs and physical exertion influence the

measured values in various ways. i

Measure your blood pressure before meals. i

Before taking readings, allow yourself at least five minutes rest. i

If the systolic and diastolic readings seem unusual (too high or too low) on several

occasions, despite correct use of the unit, please inform your doctor. This also

applies to the rare occasions when an irregular or very weak pulse prevents you

from taking readings.

2.7 Influencing and evaluating readings

•

3 Getting started

You must insert the batteries provided before you can use your unit. The lid of the bat-

tery compartment is located on the underside of the unit. Open it, remove it and

insert the 4 x 1,5 V batteries, type AAA / LR03 supplied. Ensure correct polarity when

inserting the batteries (as marked inside the battery compartment). Close the

battery compartment. Replace the batteries if the change battery symbol appears

on the display (together with "Lo") or if nothing appears on the display after the

unit has been switched on. If a flashing change battery symbol appears on the

display, the power is sufficient for approx. 10 more measurements, before the batteries

are completely empty.

3.1 Inserting/changing batteries







WARNING - BATTERY SAFETY INFORMATION

• Do not disassemble batteries!

• Remove discharged batteries from the device immediately!

• Increased risk of leakage, avoid contact with skin, eyes and mucous

membranes! If battery acid comes in contact with any of these parts,

rinse the affected area with copious amounts of fresh water and seek

medical attention immediately!

• If a battery has been swallowed seek medical attention immediately!

• Replace all of the batteries simultaneously!



•

2 Useful Information / 3 Getting started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana BU 550 CONNECT Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Medisana BU 550 CONNECT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info