29
Troubleshooting: ITC 2.0 Circuit Board Fuse Replacement
The ITC, or Intelligent Temperature Control system on your Grill, is a two-way logic system with
microprocessor technology. In the interest of protection from power surges and electrical shorts,
the ITC utilizes a 5 amp, 120 volt Fast-Blow Fuse*. This simple and inexpensive part can be easily
replaced with the following instructions.
1. Ensure that the grill is cool, powered-down, AND
UNPLUGGED.
2. Using a flat head screwdriver, pry open the fuse
holder on your AC power plug-in (where you plug the
power cord into the grill).
3. If you have access to a multimeter, check for current
flow across the two nodes of the fuse. If you do not,
simply inspect the filament of the fuse.
4. If the fuse seems to be blown, replace it with an
identical fuse, as is identified in the figure to the right.
There is a spare fuse located in the IEC plug
included with the grill.
5. Swap fuses and take note of the model of fuse so
that a replacement can be purchased.
Active Fuse
Spare Fuse
A 1-1/4” x 1/4”, 5 AMP,
120 VOLT, FAST-BLOW
CARTRIDGE FUSE*
*European models use a 1-1/4” x 1/4”, 5 AMP, 230 Volt Fast-Blow Cartridge Fuse
