RThe wheels or tires have been changed or
newly installed.
Driver's display:
4©5Service
#Select Tire Pressure and conrm with a.
#Swipe downwards on Touch Control on the
steering wheel.
The Use current pressures as new reference
values? message is shown in the driver's dis-
play.
#Select Yes and conrm therestart with a.
The Tire Pressure Monitor Restarted message
is shown in the driver's display.
Current warning messages are deleted and
theyellow hwarning lamp goes out.
Aer you have been driving for a few minutes,
the system checks whether the current tire
pressures are within the specied range. The
current tire pressures are then accepted as
reference values and monitored.
If the tire pressure levels are not within the
specied range, thePlease Correct Tire Pres-
sure message appears.
Bear in mind thefollowing related topic:
RNotes on tire pressure (/page 383)
Loading tLoading the vhe vehicleehicle
NNoottes on Tes on Tirire and Loading Infe and Loading Inforormation placardmation placard
&WWARNINGARNING Risk of accident from overloa-
ded tires
Overloaded tires may overheat and burst as a
consequence. Overloaded tires can also
impair the steering and handling characteris-
tics and lead to brake failure.
#Observe the load rating of the tires.
#The load rating must be at least half the
permissible axle load of thevehicle.
#Neveroverload the tires by exceeding
the maximum load.
The Tire and Loading Information placard is on the
B-pillar on the driver's side of thevehicle.
1Tire and Loading Information placard
388388 Wheels and tires
