Bedienungsanleitung Mercedes SLC 2018 (Seite 280 von 298) (Englisch)

703625

280

Zoom out

Zoom in

Vorherige Seite

1/298

Nächste Seite

requirements of the U.S. Department of Trans-

portation.

Manufacturer identificationcode: manufac-

turer identification code ; provides details on

the tire manufacturer. New tires have acode

with two symbols. Retreaded tires have acode

with four symbols.

For further informationabout retreaded tires,

see (

Y page284).

Tire size: identifier = describes the tire size.

Tire type code: tire type code ? can be used by

the manufacturer as acode to describespecific

characteristics of the tire.

Date of manufacture: date of manufacture A

provides informationabout the age of atire. The

first and second positions represent the weekof

manufacture, starting with "01" for the first cal-

endar week. Positions three and four represent

the yearofmanufacture. For example, atire that

is marked "3214" was manufactured in week32

in 2014.

Tire data is vehicle-specific and may deviate

from the data in the example.

Tire characteristics

This informationdescribes the type of tire cord

and the number of layers in sidewall : and

under tire tread ;.

Tire data is vehicle-specific and may deviate

from the data in the example.

Definition of terms for tires and loading

Tire ply compositionand material used

Describes the number of plies or the number of

layers of rubber-coated fabricinthe tire tread

and sidewall. These are made of steel, nylon,

polyester and other materials.

Bar

Metric unit for tire pressure. 14.5038 pounds

per square inch (psi)and 100 kilopascals(kPa)

are the equivalent of 1bar.

DOT (Department of Transportation)

DOT-marked tires fulfill the requirements of the

USDepartment of Transportation.

Normal occupant weight

The number of occupants for which the vehicle

is designed multiplied by 68 kilograms (150 lbs).

Uniform Tire Quality Grading Standards

Auniform standard to gradethe quality of tires

with regards to tread quality,tire traction and

temperature characteristics. The quality grad-

ing assessment is made by the manufacturer

following specifications from the U.S. govern-

ment. The ratings are moldedinto the sidewallof

the tire.

Recommended tire pressures

The recommended tire pressure appliestothe

tires mounted at the factory.

The Tire and Loading Information placard con-

tains the recommended tire pressures for cold

tires on afullyloaded vehicleand for the maxi-

mum permissiblevehiclespeed.

The tire pressure table contains the recommen-

ded pressures for cold tires for various operat-

ing conditions, i.e. differing loadand speedcon-

ditions.

Increased vehicle weight due to optional

equipment

The combined weight of all standard and

optionalequipment available for the vehicle,

regardless of whetheritisactually installed on

the vehicleornot.

Rim

This is the part of the wheelonwhich the tire is

mounted.

GAWR (Gross AxleWeight Rating)

The GAWR is the maximumgross axle weight

rating. The actualloadonanaxle must never

exceed the gross axle weight rating. The gross

axle weight rating can be found on the vehicle

identification plate on the B-pillar on

the dri

ver's

side.

278

Allabout wheels and tires

Wheels and tires

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mercedes SLC 2018 Seite 280

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mercedes SLC 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info