494961
16
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
O p e r a t i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
1 2
Remote control
Digital video projector
operation
The remote control operates both Meridian
DILA projectors and DVP digital video
processors.
Press
DVP or DILA to select the product
you want to control.
Point the infra-red light at the top of the
remote control towards the product.
The digital video processor has a sensor on
the front panel.
The projector may have sensors at the front
and rear; see the projector user manual
for details. In addition, you may be able to
control the projector by pointing the remote
control at the screen so the beam reflects
back to the projector.
To work reliably the angle of the beam
needs to be within ±30° of centre, and
the total distance needs to be less than 7
metres.
1 2
3
4
5
6
7
8 9
0
Bright.
Cont.
Lig ht
DVP
DILA
On
Off
Profile
Menu
Enter
DVI
Video
RGB
Colour
Tint
Detail
YCrCb
S-Video
Store
Bypass
Hide Zoom
Test
T
W
Focus Pattern
Preset
Exit
Anamorphic
4:3
Letterbox
Select processor
Navigate menus
Select projector
Turn processor/projector
to standby.
Hold down or switch
projector to cool-down
mode
Display/hide menu
Select video input
Adjust image detail
using < or >
Adjust NTSC tint
using < or >
Adjust projector focus*
Display test patterns
Zoom projector image*
* Only available with
some projectors
Adjust contrast
using < or >
Turn processor/projector on
Reset a selected menu item
to factory setting
Return from menu
Select menu item
Select aspect ratio
Adjust colour
using < or >
Display green grid signal
for focus adjustment
Hide/restore video image
Adjust brightness
using < or >
Illuminate backlight for 10
seconds
To replace the batteries
Before use, load 3 AAA size batteries into
the remote control. If the remote control
starts to function erratically, replace the
batteries.
Gently press the circular recess near the
top of the battery cover on the back of
the remote control.
Slide the cover down and off.
Insert three penlight cells by pressing
the negative terminal of each battery
against the corresponding spring and
snapping into place.
Alkaline cells types AAA, UM04 or IECR03
are recommended.
The correct orientation of the batteries is
indicated in the battery compartment.
Replace the battery compartment cover
and slide it upwards, engaging the
two tabs at the top of the cover with
the slots provided at the top of the
compartment.
Push the cover up until it clicks shut.
When correctly engaged, the cover should
sit flush with the rear of the remote control.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Meridian DVP 1080 HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info