494961
23
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
C o n f i g u r i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
1 9
To test what the output is from the source:
Display a 10-step greyscale pattern from a test pattern DVD.
The correct setting is when all ten bars are visible and evenly lit. An incorrect setting will
produce an image that either looks dull, or the brightest and darkest bars are missing
(clipping).
Enabling or disabling video inputs
To enable or disable the video inputs
Select the appropriate input option:
SET: VIDEO INPUT
ENABLE
Press < or > to change the input between ENABLE and DISABLE.
The following inputs are available:
VIDEO, S-VIDEO, RGB, YCrCb, DVI, and PASS-
THROUGH.
To set the DVI input H-sync
Sets the DVI sync position to normal or wide:
SET:DVI INPUT H SYNC
NORMAL
Only available when the DVI input is selected and a video HD rate input is detected.
With some non-standard DVI sources selecting
WIDE will correct improper sync timing
seen as a horizontal image shift.
Configuration settings
The following settings effect the general configuration of the unit and the control inputs
and outputs:
Setting Description
OSD
Can be switched between
ON and OFF to certify the presence of
the on-screen display.
OSD TIMER Can be set to between 0 and 255 seconds (default 30).
VFD TIMER Specifies how long the front panel display stays on after an
operation. Can be set to 0 (off), 1-254 seconds, or 255 = always on
(default 30).
VFD TIMEOUT LVL Sets the brightness level of the front panel display after the VFD
TIMER period has elapsed.
RS232 ECHO
Can be set to
ON or OFF to determine whether command echoes
are sent back to the RS232 control device.
BAUD RATE
Can be set to
9600, 19200 (default), or 57600 to specify the
RS232 communication baud rate.
SCREEN TRIGGER
Can be set to
OFF or ON (default) to determine the operation of
the 12V external trigger.
OFF takes the 12V output low when the
DVP1080HD is powered up and
ON takes it high.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Meridian DVP 1080 HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info