Bedienungsanleitung Metabo BAS 505G (Seite 16 von 48) (Deutsch, Englisch, Holländisch, Französisch)

451401

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

cooking stoves, refrigerators when

operating this machine.

• Do not use the power cable for any

purpose it is not intended for.

Risk of injury by moving parts!

• Do not operate saw without guards

installed.

• Always keep sufficient distance to

the band saw blade. Use suitable

feeding aids, if necessary. Keep suf-

ficient distance to driven compo-

nents when operating this machine.

• Wait for the band saw blade to come

to a complete stop before removing

cutoffs, scrap, etc. from the work

area.

• Cut only stock of dimensions that

allow for safe and secure holding

while cutting.

• Do not attempt to stop the band saw

blade by pushing the workpiece

against its side.

• Ensure machine is disconnected

from power supply before servicing.

• Ensure that when switching on (e.g.

after servicing) no tools or loose

parts are left on or in the machine.

• Unplug if the machine is not used.

Cutting hazard, even with the

cutting tool at standstill!

• Wear gloves when changing cutting

tools.

• Store band saw blades in such man-

ner that nobody will get hurt.

Risk of kickback (workpiece is

caught by the band saw blade and

thrown against the operator)!

• Do not jam workpieces.

• Cut thin or thin-walled workpieces

only with fine-toothed band saw

blades. Always use sharp band saw

blades.

• If in doubt, check workpiece for

inclusion of foreign matter (e.g. nails

or screws).

• Cut only stock of dimensions that

allow for safe and secure holding

while cutting.

• Never cut several workpieces at the

same time – and also no bundles

containing several individual pieces.

Risk of personal injury if individual

pieces are caught by the band saw

blade uncontrolled.

• When cutting round stock, use a

suitable jig to prevent the workpiece

from turning.

Drawing-in/trapping hazard!

• Ensure that no parts of the body or

clothing can be caught and drawn in

by rotating components (no neck-

ties, no gloves, no loose-fitting

clothes; contain long hair with hair-

net).

• Never saw workpieces containing

the following materials:

− ropes

− strings

− cords

− cables

− wires

Hazard generated by insuffi-

cient personal protection gear!

• Wear hearing protection.

• Wear safety glasses.

• Wear dust mask.

• Wear suitable work clothes.

• When working outdoors wearing of

non-slip shoes is recommended.

Risk of injury by inhaling wood

dust!

• Dust of certain timber species (e.g.

oak, beech, ash) can cause cancer

when inhaled: work only with a suit-

able dust collector connected to the

saw. The dust collector must comply

with the data stated in the technical

specifications.

• See to it that only as little as possi-

ble wood dust will get into the envi-

ronment:

− remove wood dust deposit in the

work area (do not blow away!);

− fix any leakages on the dust col-

lector;

− ensure good ventilation.

Hazard generated by modifica-

tion of the machine, or use of parts

not tested and approved by the equip-

ment manufacturer!

• Assemble saw in strict accordance

with these instructions.

• Use only parts approved by the

equipment manufacturer. This

applies especially for:

− band saw blades (see “Technical

Specifications” for stock nos.);

− safety devices (see “Technical

Specifications” for stock nos.).

• Do not change any parts.

Hazard generated by machine

defects!

• Keep machine and accessories in

good repair. Observe the mainte-

nance instructions.

• Before any use check machine for

possible damage: before operating

the machine all safety devices, pro-

tective guards or slightly damaged

parts need to be checked for proper

function as specified. Check to see

that all moving parts work properly

and do not jam. All parts must be

correctly installed and meet all con-

ditions necessary for the proper

operation of the machine.

• Damaged protection devices or

parts must be repaired or replaced

by a qualified specialist. Have dam-

aged switches replaced by a service

centre. Do not operate machine if

the switch can not be turned ON or

OFF.

• Keep handles free of oil and grease.

3.3 Symbols on the machine

Danger!

Disregard of the following

warnings can lead to severe personal

injury or material damage.

Read instructions.

Band saw blade running

direction.

Information on the nameplate:

3.4 Safety devices

Upper blade guard

The upper blade guard (32) protects

against unintentional contact with the

saw blade and from chips flying about.

In order for the upper blade guard to pro-

vide adequate protection against contact

with the band saw blade, it must always

be set as close as possible against the

workpiece (max. distance 3 mm).

(25) Manufacturer

(26) Serial number

(27) Machine designation

(28) Motor specifications (see also

“Technical Specifications”)

(29) Year of make

(30) CE-mark – This machine con-

forms to the EC directives as per

Declaration of Conformity

(31) Dimensions of approved band

saw blades

29 30 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BAS 505G Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info