Bedienungsanleitung Metabo BAS 600 (Seite 10 von 38) (Deutsch, Englisch, Holländisch, Französisch)

451402

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

1.1 Scope Of Delivery

Band Saw BAS 600, preassembled,

complete with - general purpose band saw blade

- grey iron table

- rip fence

- table insert

- operating instructions

User Responsibility/Warranty

This machine will perform in conformity with the

description contained in the instructions provided. This

machine must be checked periodically. Defective

equipment (including power cables) should not be used.

Parts that are broken, missing, obviously worn, distorted

or contaminated, should be replaced immediately. Should

such repair or replacement become necessary, it is

recommended that only genuine Elektra Beckum

replacement parts are used and that such repairs are

carried out by qualified persons approved by Elektra

Beckum or its representatives. Failure to comply relieves

Elektra Beckum from product liability. The aforementioned

also applies to all accessories offered for this machine.

This machine or any of its parts should not be altered or

changed from standard specifications. The user of this

machine shall have the sole responsibility for any

malfunction which results from improper use or

unauthorized modification from standard specifications,

faulty maintenance, damage or improper repair by anyone

other than qualified person approved by Elektra Beckum

or its representatives.

Please fill in the warranty registration card and send to

the address shown on it. Normal wearing parts and

consumables are not covered by the warranty.

Elektra Beckum reserves the right to change

specifications and design without prior notice and without

incurring obligation of any kind. Equipment referred to as

available or optional may be at extra cost.

1.2 Specified Conditions Of Use

This Band Saw model BAS 600 is designed for sawing

wood. Sawing or cutting any other material is not

permitted.

Prior to sawing check each workpiece for possible flaws,

inclusions of foreign matter (e.g. nails) etc.

This band saw can be used for rip and cross cutting

timber, provided a suitable saw blade is installed for the

job on hand.

Cut round stock only with the aid of suitable jigs and

fixtures.

The specified conditions of use entail the observation of

all operating, service and maintenance instructions given

by the manufacturer, as well as the close observation of

all safety information given in the operating instructions.

This band saw should only be set up, operated and

serviced by persons familiar with such work and who are

aware of the risks of such work.

All relevant safety regulation for the operation of circular

saws, as well as all generally accepted industrial medicine

standards and safety regulations have to be observed.

Contents

1 Specifications

1.1 Scope Of Delivery

1.2 Specified Conditions Of Use

1.3 Safety Information

2 Band Saw Installation

3 Rip Fence

4 Band Saw Setup

4.1 Blade Guiding

4.2 Blade Setting

4.3 Blade Speed Selection

4.4 Cutting Height Setting

4.5 Saw Table Tilting

4.6 Saw Blade Changing

4.7 Drive Belt Changing

5 Electrical Equipment

6 Dust Collection

7 Optional Accessories

8 Replacement Saw Blades

9 Wiring Diagrams

10 Spare Parts List

11 Exploded View Drawings

1 Specifications

Dimensions (lxwxh) 830x845x1860 mm

Weight 160 kg

Table height from floor 945 mm

Throat capacity 440 mm

Max. height of cut 275 mm

Saw blade

length 3380 mm

width 6 - 25 mm

Saw table tilts from 90° through 45°

Blade speed 410 - 1025 m/min,

steplessly adjustable

Motor capacity

Motor 1~ 230 V input P

1.5 kW output P

1.1 kW

Motor 3~ 400 V input P

1.5 kW output P

1.1 kW

Noise information according to DIN 45635

Sound power level L

: idlingunder load

85 dB(A) 90 dB(A)

Workplace related noise

emission value: 75 dB(A) 82 dB(A)

ENG

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BAS 600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info