Bedienungsanleitung Metabo BE 500-6 (Seite 11 von 68) (Alle Sprachen)

658442

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

7.3 Presetting the speed (depending on

features)

Select the maximum speed using the preselection

wheel (5). For recommended rotational speeds for

drilling, see page 3.

7.4 On/Off switch, modifying the speed

Switching on, speed: press the trigger switch (6).

Press in the trigger to increase the rotational

speed.

To switch off release the trigger switch.

Continuous activation: With the trigger (6)

pressed, push in the locking button (7) and

release the trigger. Press and release the trigger

(6) again to switch off.

In continuous operation, the machine

continues running if it is forced out of your

hands. Therefore, always hold the machine with

both hands using the handles provided, stand

securely and concentrate.

7.5 Tool Change with Futuro Top Keyless

Chuck (1)

See illustrations A, page 2.

Open chuck: Hold the retaining ring and turn the

sleeve with your other hand in direction of the

arrow -1-.

Fit the tool: Insert the tool -2- as far as possible.

Hold the retaining ring and turn the sleeve as far as

it will go with your other hand in direction of the

arrow -3-.

7.6 Unscrewing the chuck

(To screw without a chuck or when using

attachments)

See illustration B, page 3.

Hold the drill spindle tight with the supplied open-

ended spanner. Clamp an Allen key in the chuck

and strike lightly with a rubber hammer to loosen,

then unscrew.

Tighten just as firmly.

The chuck must be screwed firmly to the

spindle. If rotated counter-clockwise (e.g.

when screwing) it could otherwise become loose.

Note:

If a bit clamping bush (order no. 6.31281) is

attached, the screwdriver bit inserted in the

hexagon socket of the spindle is held in place.

7.7 LED lamp (depending on the features)

For working in badly lit areas. The LED light (9)

lights up when the machine is switched on.

8.1 Only for cordless machines; the

machine's multifunctional monitoring

system

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

Causes and remedies:

1. Battery pack almost flat (the electronics

prevent the battery pack from discharging totally

and avoid irreparable damage).

If one LED is flashing, the battery pack is almost

flat. (13) If necessary, press the (14) button and

check the LEDs (13) to see the charge level. If

the battery pack is almost flat, it must be

recharged.

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note:

If the battery pack feels very warm, the

pack will cool more quickly in your "AIR

COOLED" charger.

Note:

The machine will cool more quickly if you

operate it at idling speed.

3. If the current is too high (for example, if the

machine seizes continuously for long periods),

the machine switches off.

Switch off the machine at the trigger switch (6).

Then continue working as normal. Try to prevent

the machine from seizing.

ENG

Use only genuine Metabo accessories.

Use only accessories which fulfil the requirements

and specifications listed in these operating

instructions.

Fit accessories securely. Secure the machine if it is

operated in a bracket. Loss of control can cause

personal injury.

A Battery chargers: ASC Ultra, ASC 15, ASC 30

and others.

B Battery packs 18 Volt: 5.2 Ah (6.25592); 4.0 Ah

(6.25591); 3.0 Ah (6.25594)

See www.metabo.com or the catalogue for a

complete range of accessories.

Repairs to electrical tools must ONLY be carried out

by qualified electricians!

Contact your local Metabo representative if you

have Metabo power tools requiring repairs. See

www.metabo.com for addresses.

You can download a list of spare parts from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: never dispose of

power tools in your household waste! Used

power tools must be collected separately and

8. Troubleshooting

9. Accessories

10. Repairs

11. Environmental Protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo BE 500-6 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info