759392
10
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
ENGLISHen
10
Before plugging in, check that the rated mains
voltage and mains frequency, as stated on the
type plate match your power supply.
Always install an RCD with a maximum trip
current of 30 ma upstream.
7.1 Switching On and Off
Switching on:
Move switch (1) to "I" position.
Switching off:
Move switch (1) to "O" position.
7.2 Attaching, removing adhesive sanding
sheet
To fit
Press adhesive sanding sheet (13) on to the
sanding plate (10).
Removal
Remove adhesive sanding sheet (13) from the
sanding plate (10).
7.3 Setting the oscillating frequency
Rotate adjustment setting wheel (2) and set
oscillation speed (smooth setting possible, even
during operation).
Recommended oscillation settings for different
materials
1 - 2 Plastic
3 - 4 Metal, Plebeians
5 - 6 Wood
Recommended oscillation settings for different
activities
5 - 6 Polishing (when using adhesive polishing
felt, adhesive polishing fleece or adhesive
cleaning fleece)
7.4 Aligning grinding plate
You can align the grinding plate in 60° steps as
required.
Move grinding plate (10) down.
At the same time, rotate the grinding plate (10) into
the desired position.
Release grinding plate (10), if necessary, continue
turning until it locks.
7.5 Removing, attaching grinding plate
Removal
Remove the adhesive sanding sheet (13).
Loosen hexagon socket screw (12) with hexagon
spanner (6) and screw out.
Remove spring (11) from the insert in the grinding
plate (10).
Remove grinding plate (10).
To fit
Place the grinding plate (10) such that it locks and
can no longer be rotated.
Place spring (11) into the insert in the grinding plate
(10).
Screw hexagon socket screw (12) with hexagon
spanner (6).
7.6 Removing, attaching dust cassette
Removal
Push the locking hook on the dust cassette (9) and
remove the dust cassette from the back.
To fit
Push the locking hook on the dust cassette (9) and
insert the dust cassette to the stop on the triangle
cutter.
Locking hook must lock on the triangle cutter.
7.7 Changing dust filter
Remove dust cassette (9).
Remove cover (7).
Remove dust filter (8).
Push new dust filter (8) so far into the dust cassette
(9) that is does not protrude.
Attach cover (7).
Attach dust cassette (9).
Clean suction channel
Clean suction channel if it is blocked and is thereby
hindering the extraction.
Remove dust cassette (9) or the extraction sockets
(3).
6. Commissioning
7. Use
8. Cleaning, Maintenance
9
17
18
16
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metabo DSE 280 Intec wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info