Bedienungsanleitung Metabo KGS 303 (Seite 7 von 64) (Englisch, Französisch, Spanisch)

594924

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

regarding the permissible dimensions of

work pieces.

Do not cut pieces having an irregular

cross section, such as firewood,

because such pieces cannot be held

securely during cutting and pose serious

danger to the operator.

A suitable auxiliary fence must be

used

for firm support when cutting thin work

pieces in an upright position, such as

moldings.

Any use other than the use specified

above, any alteration, modification, use

of used spare parts, use of non-OEM

spare or replacement p

arts, use of other

parts and components not specifically

approved by the manufacturer, may

cause unforeseeable danger, may result

in damage and/or personal injury. Any of

the above will void the machine war-

ranty.

The manufacturer,

its agents, subsidiar-

ies, distributors or dealers shall have no

liability whatsoever for injuries or dam-

age caused entirely or in part through

use other than the use specified above,

any alteration, modification, use of used

pare parts, use of non-OEM spare or

replacement parts, use of other parts

and components not specifically

approved by the manufacturer.

3.2 General Safety Instruc-

tions

General Danger

Electricity

A DANGER

x All power tools carry with them

some degree of danger. Observe

the following safety instructions to

minimize this danger and to assure

the safe and efficient operation of

this machine.

x Do net let convenience or famili-

arity with this machine (resulting

from repeated use) lead to non-

observance of any safety rules.

If you are careless or use this

machine incorrectly you can suf-

fer serious personal injuries.

A DANGER

x Keep bystanders, particularly chil-

dren, at least 6 feet away from the

machine at all times.

x Children must never be allowed in

the work area. Do not let children

handle the machine, any tools or

the extension cord.

A WARNING

x Keep your work area clean at all

times. Always remove small wood

chips and small pieces from the

machine. A messy work area tends

to lead to accidents.

YOU CAN PREVENT ACCI-

DENTS!

x Be alert. Know what you are doing.

Set out to work with reason.

x DO NOT OPERATE THE

MACHINE WHILE UNDER THE

INFLUENCE OF ALCOHOL OR

DRUGS, INCLUDING PRESCRIP-

TION DRUGS AND OVER-THE-

COUNTER MEDICATION. SOME

PRESCRIBED DRUGS AND

SOME OVER-THE-COUNTER

MEDICATION MAY IMPAIR YOUR

ABILITY TO SAFELY OPERATE

THIS MACHINE. CONSULT YOUR

PHYSICIAN IF YOU TAKE

ANY

PRESCRIPTION DRUGS OR

YOUR PHARMACIST IF YOU

TAKE ANY OVER-THE-COUNTER

MEDICATION.

x Always choose a body position with

secure footing and proper balance

which allows you to operate the

machine without straining or reach-

ing

too far.

x Do not operate the machine near

inflammable liquids or gases.

x Do not permit other persons to

touch the machine or power cable

while it is running.

x Do not step on the machine.

x For ev

ery job there are power tools

to do the job right and others that

are not really appropriate.

x Use this machine only in accord-

ance with the Specified Conditions

of Use. Please refer to chapter 3.1

for details.

x After use

, store the machine in a

dry and safe place where it cannot

be used or tampered with by any

unauthorized person or by children.

x Never store the machine outdoors,

in unprotected areas or in damp

locations.

A CAUTION

x Make your work place safe. Only

operate the machine in well lit

places.

x Do not overload the machine. For

more information on the perform-

ance range and limitations of this

machine, see chapter 15, "Techni-

cal Specifications".

x Protect bystanders in your work

area from injury by flying sparks or

chips by keeping them at least 6

feet away from the machine.

x Remove the transport locking pin

before initial operation of the

machine.

A DANGER

x Do not expose machine to rain.

Do not operate machine in damp or

wet environment.

x Position power supply cable so it

does not interfere with the work

and is not damaged.

x Do not operate machine with dam-

ged power cord.

x Make sure of sufficient lighting at

the work place.

A WARNING

x Do not use the power cable for pur-

poses it is not intended for.

x Use only suitable U.L. or CSA

approved extension cords. Mini-

mum gauge:

 cord length up to 50 ft:

AWG #12

 cord length up to 100 ft:

AWG #10

x To reduce the risk of electric shock,

this equipment has a polarized plug

(one blade is wider than the other).

This plug will fit in a polarized outlet

only one way. If the plu

g does not

fit fully in the outlet, reverse the

plug. If it still does not fit, contact a

qualified electrician to install the

proper outlet. Do not change the

plug in any way.

A CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KGS 303 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info