Bedienungsanleitung Metabo KGS 303 (Seite 8 von 64) (Englisch, Französisch, Spanisch)

594924

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Risk of injury by moving parts

Entanglement with the machine

Insufficient personal protection gear

Dust

x Before plugging the machine in,

check the voltage and cycle rating

(120 V, 60 Hz) on the nameplate of

the machine and make sure you

have a proper power source with

the same

rating. If not, consult a

qualified electrician for assistance.

x Be careful not to kink, squeeze or

pull the power cord and/or any

extension cord, and make sure that

you protect the cord(s) from dam-

age caused by rolling over

, heat,

aggressive substances like acid, or

other potential damage arising at

the work site.

x If the power cord or an extension

cord is damaged, never try to repair

it, but have a qualified electrician or

other auth

orized repair personnel

replace the damaged cord.

A CAUTION

x To avoid electrical shock, ensure

there is no contact with grounded

objects such as radiators, pipes,

ovens, refrigerators, etc. when

operating this machine.

x Ensure nobody can trip over or

inadvertently pull on the power

cord.

x Ne

ver pull on the power cord to

unplug the machine as this can

damage the cord and lead to a

hazard.

A DANGER

x Do not operate the machine with-

out installed guards.

x Make sure the power cord is

unplugged before servicing, trou-

bleshooting or changing parts.

x Remove all tools and loose parts

from the machine before plugg

ing

in and operating the machine after

service or troubleshooting.

x After completing a cut, do not let go

of the handle of the machine or

your work piece until all moving

parts of the machine have

come to

a full stop.

A WARNING

x When the machine is not in use,

switch it to OFF and unplug it.

A WARNING

x Make sure your work pieces are

secured in place during cutting so

that they cannot move.

x Work stock only in the direction

intended for the machine.

x Do not exert exessive force on the

machine with the work piece.

x Never have the machine running

unattended. Turn power OFF.

Don't leave the machine until it

comes to a full stop.

A DANGER

Be careful that no part of your body or

your clothing can be caught by and

pulled into the machine.

x Do not wear any loose clothing.

x Do not wear any gloves.

x Long hair has to be covered (for

example by

making a pony tail and

then tucking the hair in under a cap

or hat).

x Dangling jewelry, rings, bracelets,

necklaces and other personal items

which might get caught in the

machine have to be removed

efore starting to work with this

machine.

A WARNING

x Use eye protection. Always wear

ANSI approved impact safety gog-

gles. If you are producing metal fil-

ings or wood chips, wear a full face

shield.

x Use ear protection. Always wear

ANSI approved ear

protection such

as ear plugs or ear muffs.

x Use respiratory protection when

working around metal, wood, espe-

cially treated wood, chemical dusts

or mists. Always wear an ANSI

approved dust mask or respirator

or other respiratory protection in

accordance

with current OSHA,

MSHA and NIOSH regulations.

x Wear head protection if required by

your type of work or by regulations

applying to the job site.

x Wear protective, electrically non-

conductive clothes and non-skid

foot wear.

A WARNING

A CAUTION

x Wear suitable work clothes.

x When working outdoors wearing

of non-slip shoes is recom-

mended.

x Ensure a fire extinguisher is within

reach.

A DANGER

x DO NOT CUT ANY HAZARDOUS

MATERIALS OR MATERIALS

THAT CONTAIN HAZARDOUS

SUBSTANCES OR HAVE BEEN

TREATED WITH HAZARDOUS

SUBSTANCES.

A WARNING

x Some types of wood dust (e.g.

maple, oak, cedar) may cause

allergic reactions and other health

problems such as skin rashes, etc.

If possible, work with a suitable

dust collector connected to the

saw. The dust collector must com-

y with the data stated in chapter

15, entitled "Technical Specifica-

tions".

x Dust generated by sawing, sand-

ing, drilling and similar work may

contain substances that are known

or suspected to cause cancer,

damage to reproductive organs

and/or the

ability to procreate, and/

or may cause damage to fetuses

and unborn children. Lead, lead

paint, arsenic or chromium treated

wood (often referred to as "green

wood" or pressure-treated lumber)

and quartz dust or silica from con-

crete are just some, but in no case

an e

xclusive list of such sub-

stances. The actual health risk

depends on the length of exposure

to these substances, the circum-

stances as well as the degree of

respiratory and other protection

used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KGS 303 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info