Bedienungsanleitung Metabo KH 18 LTX BL 28 (Seite 9 von 88) (Alle Sprachen)

816522

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH en

We, being solely responsible: Hereby declare that

these cordless hammers, identified by type and

serial number *1), meet all relevant requirements of

directives *2) and standards *3). Technical

documents for *4) - see page 3.

For UK only:

We as manufacturer and authorized person to

compile the technical file, see *4) on page 3,

hereby declare under sole responsibility that these

drilling and chisel hammer, identified by type and

serial number *1) on page 3, fulfill all relevant

provisions of following UK Regulations S.I. 2016/

1091, S.I. 2008/1597, S.I. 2012/3032 and

Designated Standards EN 62841-1:2015, EN IEC

62841-2-6:2020/A11:2020, EN IEC 63000:2018

The cordless hammers are suited, with appropriate

accessories, for working with hammer drill bits and

chisels in concrete, stone and similar materials and

with core bits in tiles and similar, as well as drilling

without impact in metal, wood, etc and for

screwdriving.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your power tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Read the operating

instructions to reduce the risk of injury.

WARNING – Read all safety warnings,

instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference. Always include these documents when

passing on your power tool.

4.1 Safety instructions for all operations

a) Wear ear protectors. Exposure to noise can

cause hearing loss.

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold the power tool by insulated gripping

surfaces, when performing an operation where

the cutting accessory or fasteners may contact

hidden wiring. Cutting accessory contacting a

"live" wire may make exposed metal parts of the

power tool "live" and could give the operator an

electric shock.

4.2 Safety instructions when using long drill

bits with rotary hammers

a) Always start drilling at low speed and with

the bit tip in contact with the workpiece. At

higher speeds, the bit is likely to bend if allowed to

rotate freely without contacting the workpiece,

resulting in personal injury.

b) Apply pressure only in direct line with the bit

and do not apply excessive pressure. Bits can

bend, causing breakage or loss of control, resulting

in personal injury.

4.3 Further Safety instructions

Always work with the additional handle correctly

installed.

Always hold the machine with both hands at the

intended handles, take a secure stance and

concentrate on the work.

Wear personal protective equipment and

always wear safety glasses. Protective

equipment such as dust mask, non-skid safety

shoes, protective gloves, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

Ensure that the spot where you wish to work is free

of power cables, gas lines or water pipes (e.g.

using a metal detector).

Do not touch the rotating tool!

Secure the workpiece to prevent slipping or rotation

(e.g. by securing with screw clamps).

Remove chips and similar material only with the

machine at a standstill.

Caution must be exercised when driving screws into

hard materials (driving screws with metric or

imperial threads into steel)! The screw head may

break or a high reverse torque may build up on the

handle.

S-automatic safety clutch: If the tool jams or

catches, the power supply to the motor is restricted.

Due to the strong force which can arise, always hold

the machine with both hands using the handles

provided, stand securely and concentrate.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defective

additional handle.

LED light (20): do not observe the LED radiation

directly with optical instruments.

CAUTION Do not stare at operating lamp.

Remove the battery pack from the machine before

making any adjustments, changing tools,

maintaining or cleaning.

Original instructions

1. Declaration of Conformity

2. Specified Conditions of Use

3. General Safety Information

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KH 18 LTX BL 28 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info