Bedienungsanleitung Metabo KH 18 LTX BL 28 (Seite 11 von 88) (Alle Sprachen)

816522

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH en

Instructions on charging the battery pack can be

found in the operating instructions of the Metabo

charger.

Battery packs have a capacity and signal display

(22) (depends on design variant):

- Press the button (21); the LEDs indicate the

charge (22) level.

- The battery pack is almost empty and must be

recharged if one LED is flashing.

6.3 Removing and inserting the battery pack

Removing:

Press the battery pack release (17) button and

remove the battery pack (23).

Inserting:

Slide in the battery pack (23) until it engages.

7.1 Depth Stop Setting

Loosen the additional handle (7). Set the depth stop

(8) to the desired drilling depth and retighten

additional handle (7).

7.2 Switching On and Off

Press the trigger switch (13) to switch on the

machine.

The speed can be changed using the trigger switch.

To switch off release the trigger switch (13).

KH 18 LTX BL 28 Q: For continuous operation, the

trigger button can be locked using the lock button

(14) . Press the trigger switch again to stop the

machine.

In continuous operation, the machine

continues running if it is forced out of your

hands. Therefore, always hold the machine

with both hands using the handles provided,

stand securely and concentrate.

7.3 Operating mode selection

Press the lock (9) and turn the thumbwheel (10).

Hammer drilling

(set only when using the hammer chuck (5) )

Chiselling

(set only when using the hammer chuck (5) )

Setting chisel position

Turn the chisel in the desired position. Then

select "Chiselling" to secure the chisel and

prevent it from twisting.

Drilling

When a chisel is fitted, only operate the

machine in the chiselling operating mode .

Avoid levering with the machine when a chisel

is fitted.

7.4 Setting impact force

(KH 18 LTX BL 28 Q)

Press the button (16) to change the impact force

(and the speed) (From 100% to 70%: Not while the

motor is running).

Button (16) illuminates: reduced impact force,

reduced speed (approx. 70%)

Button (16) not illuminated: maximum impact

force,

high speed (100%)

The correct setting is found by trial and error.

Example: if work is being completed on soft, brittle

material or if you want to keep breakage to a low

level, work at “reduced impact force”.

Use the “maximum impact force” setting for working

with harder materials.

7.5 Selection of direction of rotation

Only activate the rotation selector switch (12)

when the motor has completely stopped.

Select direction of rotation:

R = clockwise rotation (for drilling, hammer

drilling, chiselling, drive in screws)

L = anti-clockwise rotation (for the removal of

screws)

0 = Centre position: with the transporting safety

device engaged (switch-on lock)

7.6 Drill chuck change (KH...Q)

Ensure a clean spindle (6) when changing the

chuck. Apply a light coating of grease to the

spindle. (Special grease: Order No.: 6.31800)

Only attach the Metabo chuck provided.

Removing the chuck:

See page 2, fig. C.

- Turn the chuck lock (3) in the direction of the arrow

until the stop (a) and remove chuck (b).

Replacing the chuck:

See page 2, fig. D.

- Put the chuck onto the spindle (6) (a).

- Turn the chuck lock (3) in the direction of the arrow

(b) until the chuck can be pushed completely onto

the spindle and release the chuck lock.

- Check to see that the chuck is properly seated.

Note: To prevent the spindle from rotating when the

chuck is being changed, put the switch button (10)

to chiselling .

7.7 Tool change with SDS chuck

Before fitting, clean tool shank and apply

special grease (accessories order no.

6.31800)! Use only SDS-Plus tools.

Inserting tools:

- Turn tool and insert until it engages. The tool is

automatically locked.

Remove the tool:

See page 2, fig. A.

- Pull tool lock (4) backwards in direction indicated

by arrow (a) and remove tool (b).

7. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KH 18 LTX BL 28 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info