Bedienungsanleitung Metabo KS 66 PLUS (Seite 17 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595374

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

ENG

7.6 Extraction connection piece / dust

ejection

The nozzle (12) can be rotated to the desired posi-

tion to extract or eject chips. To do this, push the

nozzle in up to the stop, turn and pull out again.

The nozzle can be locked in 45° increments so that

it cannot turn.

Sawdust extraction:

connect a suitable dust extraction unit with suction

hose to the machine to extract the sawdust.

8.1 Switching on and off

Switching on:

Press locking button (10) and hold

in; then actuate the trigger (11).

Switching off:

Release the trigger (11).

8.2 Signal display (KSE 68 Plus)

The signal display (13) lights up briefly when the

machine is switched on and indicates operational

readiness. If the signal display lights up during

operation, this indicates overloading. Reduce the

load on the machine.

8.3 Working instructions

Lay out the mains cable such that the cut can be

executed without obstruction.

For this purpose, the mains cable can be held by

the cable guide (9).

The markings (17) are designed to help the user

when positioning the machine and sawing the

workpiece. In the case of maximum depth of cut,

they mark approximately the outside diameter of

the saw blade and thus the cutting area.

Do not switch the machine on or off while the

saw blade is touching the workpiece.

Let the saw blade reach its full speed before

making a cut.

When the hand-held circular saw is added, the

movable safety guard is swung backwards by the

workpiece.

KSE 68 Plus: the movable safety guard can be

swung backwards manually using the lever (8) to

make the machine easier to position on the work-

piece.

When sawing, never remove the machine

from the material with the saw blade turning.

Allow the saw blade to come to a standstill.

If the saw blade blocks, turn the machine off

immediately.

Sawing along a straight line:

the cutting indicator is used here (5). The width of

the cutting indicator represents roughly the width

of the saw disc.

Sawing along a rail secured on the workpiece:

In order to achieve an exact cutting edge, you can

attach a rail to the workpiece and then guide the

hand-held circular saw along this rail by means of

the guide plate (1).

Sawing with parallel stop:

For cuts parallel to a straight edge.

The double parallel stop (7) can be inserted from

either side into the support provided for it.

Main-

tain parallelism to the saw blade when making

the setting.

Retighten the front and then the rear

locking screw (3). It is best to calculate the exact

cut width by making a test cut.

For cuts parallel to a straight workpiece edge:

Apply the parallel stop (7) such that the stop rail is

facing down.

For cuts parallel to a straight edge on the work-

piece: Apply the parallel stop (7) such that the stop

rail is facing up.

8.4 Sawing with guide rail 6.31213

For straight and splinter-free cutting edges accu-

rate to the millimetre. The anti-slip coating keeps

the surface safe and protects the workpiece

against scratches. The machine can be placed

against the stops on the guide rail for plunge

cutting and cuts can be executed with a uniform

length.

For guide rail 6.31213, see

chapter on Accesso-

ries.

Depending on the application type and cutting

width, the parallel stop (7) can be inserted from the

right or left into its holder.

Sawing very narrow sections:

Insert the parallel stop (7) from the right into its

holder.

Clean the machine regularly. This includes vacuum

cleaning the ventilation louvres on the motor.

Changing saw blades

Pull the plug out of the plug socket before

any adjustments or servicing are performed.

- Press in the spindle locking button (28) and hold

in place. Turn the saw spindle slowly with the

8Use

9 Tips and Tricks

10 Maintenance

17026944_0209 KSE 6x Plus MG-Guss.book Seite 17 Montag, 26. Januar 2009 2:08 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KS 66 PLUS Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info