Bedienungsanleitung Metabo KSA 18 LTX (Seite 12 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595069

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISHen

Do not use dull or damaged blades.

Unsharpened

or improperly set blades produce narrow kerf causing

excessive friction, blade binding and kickback.

Blade depth and bevel adjusting locking levers

must be tight and secure before making cut.

If blade

adjustment shifts while cutting, it may cause binding

and kickback.

Use extra caution when sawing into existing

walls or other blind areas.

The protruding blade may

cut objects that can cause kickback.

Lower guard function

Check lower guard for proper closing before

each use. Do not operate the saw if lower guard

does not move freely and close instantly. Never

clamp or tie the lower guard into the open position.

If the saw is accidentally dropped, lower safety guard

may be bent. Raise the lower guard with the retracting

handle (25)and make sure it moves freely and does not

touch the blade or any other part, in all angles and

depths of cut.

Check the operation of the lower safety guard

spring. If the safety guard and the spring are not

operating properly, they must be serviced before

use.

Lower safety guard may operate sluggishly due to

damaged parts, gummy deposits, or a build-up of

debris.

Lower guard may be retracted manually only for

special cuts such as "plunge cuts" and

"compound cuts". Raise lower guard by retracting

handle (25) and as soon as blade enters the

material, the lower guard must be released.

For all

other sawing, the lower guard should operate

automatically.

Always observe that the lower safety guard is

covering the blade before placing saw down on

bench or floor.

An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever is in

its path. Be aware of the time it takes for the blade to

stop after switch is released.

Do not use grinding wheels.

Keep hands away from the rotating tool! Remove chips

and similar material only with the machine at standstill.

Wear ear protectors.

Wear protective goggles.

Press the spindle locking button only when the motor is

at a standstill.

Do not reduce the speed of the saw blade by pressing

on the sides.

The movable safety guard must not be clamped in the

pulled-back position for sawing.

The movable safety guard must move freely,

automatically, easily and exactly back into its end

position.

When sawing materials that generate large quantities of

dust, the machine must be cleaned regularly. Make

sure that the safety appliances, e.g. the movable safety

guard, are in perfect working order.

Materials that generate dusts or vapours that may be

harmful to health (e.g. asbestos) must not be

processed.

Check the workpiece for foreign bodies. When working,

always make sure that no nails or other similar materials

are being sawed into.

If the saw blade blocks, turn the motor off immediately.

Do not try to saw extremely small workpieces.

During machining, the workpiece must be firmly

supported and secured against moving.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory diseases

to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in

conjunction with additives for wood conditioning

(chromate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- To achieve a high level of dust collection, use a

suitable Metabo vacuum cleaner together with this

tool.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you want

to work with.

Clean gummy or glue-contaminated saw

blades. Contaminated saw blades cause

increased friction, jamming of the saw blade and

increase the risk of back-kicks.

Avoid overheating of the saw tooth tips. Avoid

melting of the material when sawing plastic.

Use a

saw blade that is suitable for the material being sawn.

Protect battery packs from water and

moisture!

Do not use faulty or deformed battery packs!

Do not expose battery packs to naked flame!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Remove the battery pack from the machine when

not in use.

Remove the battery pack from the machine

before any adjustment or maintenance is

carried out.

Before fitting the battery pack, make sure that

the machine is switched off.

Slightly acidic, flammable fluid may leak from

defective Li-ion battery packs!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KSA 18 LTX Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info