Bedienungsanleitung Metabo KSE 55 Vario Plus PartnerEdition (Seite 11 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595377

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH en

f) Blade depth and bevel adjusting locking

levers must be tight and secure before making

cut. If blade adjustment shifts while cutting, it may

cause binding and kickback.

g) Use extra caution when making a "plunge

cut" into existing walls or other blind areas. The

protruding blade may cut objects that can cause

kickback.

Additional Safety Instructions:

a) Do not operate the saw if lower guard does

not move freely and close instantly. Never

clamp or tie the lower guard into the open

position. If the saw is accidentally dropped, lower

guard may be bent. Raise the lower guard with the

retracting handle (17)and make sure it moves freely

and does not touch the blade or any other part, in all

angles and depths of cut.

b) Check the operation of the lower guard

spring. If the guard and the spring are not

operating properly, they must be serviced

before use. Lower guard may operate sluggishly

due to damaged parts, gummy deposits, or a build-

up of debris.

c) Open the bottom protective cover by hand

only when making special cuts, such as plunge

cuts and angle cuts. Raise lower guard by

retracting handle (17) and as soon as blade

enters the material, the lower guard must be

released. For all other sawing, the lower guard

must be released.

d) Always observe that the lower guard is

covering the blade before placing saw down on

bench or floor. An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever

is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

Do not use sanding discs.

Pull the plug out of the plug socket before any

adjustments or servicing are performed.

Keep hands away from the rotating tool! Remove

chips and similar material only with the machine at

standstill.

Wear ear protectors.

Wear protective goggles.

Press the spindle locking button only when the

motor is at a standstill.

Do not reduce the speed of the saw blade by

pressing on the sides.

The movable guard must not be clamped in the

pulled-back position for sawing.

The movable guard must move freely,

automatically, easily and exactly back into its end

position.

When sawing materials that generate large

quantities of dust, the machine must be cleaned

regularly. Make sure that the safety appliances, e.g.

the movable guard, are in perfect working order.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

Check the workpiece for foreign bodies. When

working, always make sure that no nails or other

similar materials are being sawed into.

If the saw blade blocks, turn the motor off

immediately.

Do not try to saw extremely small workpieces.

During machining, the workpiece must be firmly

supported and secured against moving.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory diseases

to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in

conjunction with additives for wood conditioning

(chromate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- To achieve a high level of dust collection, use a

suitable Metabo vacuum cleaner together with this

tool.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

Use a saw blade that is suitable for the material

being sawn.

Clean gummy or glue-contaminated saw blades.

Contaminated saw blades cause increased friction,

jamming of the saw blade and increase the risk of back-

kicks.

Metabo S-automatic safety clutch:

If the tool jams or catches, the power supply to the

motor is restricted. Due to the strong force which

can arise, always hold the machine with both hands

using the handles provided, stand securely and

concentrate.

See page 2.

1 Marking (saw blade outer diameter)

2 Cutting indicator

3Movable guard

4 Parallel stop

5 Locking screws (diagonal cuts)

6 Locking screws (parallel guide)

7 Locking button (switching on)

8 Trigger (switching on and off)

9Nozzle (

chip ejection)

10 Adjusting screws for zero-play sliding on guide

rail (guide rail not included in scope of delivery,

see chapter on Accessories)

11 Scale (diagonal cut angle)

5. Overview

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KSE 55 Vario Plus PartnerEdition Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info