Bedienungsanleitung Metabo MFE 65 (Seite 11 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600609

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH en

Original instructions

We declare under our sole responsibility: These

wall chasers, identified by type and serial number

*1), comply with all relevant requirements of the

directives *2) and standards *3). Technical file at *4)

- see page 3.

The machine is designed for cutting or slitting

channels (chasing) in primarily mineral based

materials such as reinforced concrete, masonry

and paving, while firmly supported on the level

surface, without water.

Do not use abrasive cut-off wheels.

Use only diamond cut-off wheels.

Materials that generate dusts or vapours that may

be harmful to health must not be processed.

The user bears sole responsibility for any damage

caused by improper use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your electrical tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.



Pass on your electrical tool only together with these

documents.

4.1 Safety instructions for abrasive cut-off

machines

a) The guard belonging to the power tool must

be securely attached and positioned for

maximum safety so that the minimum area of

the wheel is exposed towards the operator.

Ensure that neither you or bystanders are

positioned within the plane of the rotating

abrasive wheel. The guard helps to protect

operator from broken wheel fragments and

accidental contact with wheel.

b) Only use diamond cut-off wheels for your

power tool. Just because the accessory can be

attached to your power tool, it does not assure safe

operation.

c) The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

d) Abrasive wheels must only be used for the

applications recommended. e.g.: Never use the

side surface of a cut-off wheel for grinding.

Abrasive cut-off wheels are intended for peripheral

grinding, side forces applied to these wheels may

cause them to shatter.

e) Always use undamaged wheel flanges that

are of correct size and shape for your selected

wheel. Proper wheel flanges support the wheel

thus reducing the possibility of wheel breakage.

f) The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or

controlled.

g) The abrasive wheels and flange must fit

precisely onto your power tool's grinding

spindle. Accessories with arbour holes that do not

fit the power tool's grinding spindle will run out of

balance, vibrate excessively and may cause loss of

control.

h) Do not use damaged abrasive wheels.

Before each use, check the abrasive wheels for

chips and cracks. If the power tool or the

abrasive wheel is dropped, inspect for damage.

Never use a damaged abrasive wheel. Once

you have checked and installed the wheel,

position yourself and bystanders away from

the plane of the rotating wheel and run the

power tool at maximum no-load speed for one

minute. Damaged abrasive wheels will normally

break apart during this test period.

i) Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As

appropriate, wear dust mask, hearing

protectors, gloves and workshop apron

capable of stopping small abrasive or

workpiece fragments. The eye protection must be

capable of stopping flying debris generated by

various operations. The dust mask or respirator

must be capable of filtering particles generated by

your operation. Prolonged exposure to high

intensity noise may cause hearing loss.

j) Keep bystanders a safe distance away from

the work area. Anyone entering the work area

must wear personal protective equipment.

Fragments of workpiece or of a broken accessory

may fly away and cause injury beyond immediate

area of operation.

k) Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting accessory

contacting a "live" wire may make exposed metal

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo MFE 65 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info