Bedienungsanleitung Metabo MFE 65 (Seite 13 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600609

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH en

The diamond cutting blades continue running after

the machine has been switched off.

Always wear protective goggles, dust mask, gloves,

ear protectors and sturdy shoes when working with

this tool.

Dust from material such as paint containing

lead, some wood species, minerals and

metal may be harmful. Contact with or

inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the

operator or bystanders.



Use a suitable extraction unit!

Certain kinds of dust are classified as carcinogenic,

especially in conjunction with additives for wood

conditioning (chromate, wood preservative).

Material containing asbestos must only be treated

by specialists.

- To achieve a high level of dust collection, use a

suitable Metabo vacuum cleaner together with this

tool.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

When working in dusty conditions, ensure that

ventilation openings are not blocked. If it becomes

necessary to remove dust, first disconnect the

power tool from the mains supply (use non-metallic

objects) and avoid damaging internal components.

Damaged, eccentric or vibrating tools must not be

used.

Avoid damage to gas or water pipes, electrical

cables and load-bearing walls (static).

Connect a FI circuit-breaker with max. release

current (30 mA) upstream when using the machine

outdoors!

Pull the plug out of the socket before making any

adjustments, converting or servicing the machine.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defective

additional handle.

A damaged or cracked safety guard must be

replaced. Never operate a machine with a defective

safety guard.

Do not switch on the machine if tool parts or guard

devices are missing or defective.

An electronic error is present if the machine

accelerates very quickly to maximum speed when

switched on. Other safety-related electronic

functions are no longer available. Have the machine

repaired immediately (see

16.).

See page 2.

1 Lever for setting depth of cut

2 Scale for depth of cut

3 Aperture of extraction unit

4 Electronic signal indicator

5 Lock (to prevent the machine from being switched

on unintentionally, or for continuous operation)*

Trigger (

for switching on and off)

7 Button (to turn the main handle)*

8 Main handle

9 Additional handle

10 Retaining screw

11 Locking button

12 Clamping screw (for securing the safety guard)

13 Adjusting nut

14 Spacers

15 Cut-off wheel *

16 Cut-off wheel *

17 Back flange

18 2-hole spanner

19 Safety cover

* depending on equipment/not in scope of delivery

Before plugging in, check that the rated mains

voltage and mains frequency, as stated on the

rating label, match with your power supply.

To position the safety guard (if required):

- Release the clamping screw (12).

- Turn the safety guard until the closed section is

facing the operator.

- Tighten the clamping screw (12) firmly. Make sure

that the guard is seated securely - you should not

be able to turn the safety guard

(19).

6.1 Pivotable main handle

Only work with the main handle (8) engaged.

See illustration B on page 2.

-Push in the button (7).

- The main handle (8) can now be turned 90° to both

sides and can be engaged.

- Make sure that it is securely positioned: the main

handle

(8) must be engaged and it should not be

possible to move it.

See page 2.

Switch off the machine. 

Disconnect the mains plug!

- Lie the tool on its side (the scale (2) for depth of cut

must be visible).

- Release the lever (1) for setting the depth of cut 

and select the small depth.

-Press down the locking button (11) and turn the

spindle until you can feel the locking button lock in

place

(only when tool is stopped!).

- Remove and clean the back flange (17), spacers

(14) and adjusting nut (13).

- Fit the back flange (17) on the spindle. The flange

should not turn on the spindle when properly

attached.

- Fit the cut-off wheel (16) onto the back flange.

Make sure the direction of rotation is correct.

5. Overview

6. Initial Operation

7. Groove width

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo MFE 65 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info